
S E T U P M E N U O P T I O N S
ξVariable – Enables the analog volume control. Use the VOL+/- buttons on the remote to increase/decrease the analog audio output level (the maximum is 100).
ξFixed – Disables the analog volume control. The VOL+/- buttons on the remote will no longer affect the analog audio output, and the volume level is fixed to 100.
5.Headphone Volume: Allows you to enter the default volume level for the headphone output. To change the level, press the ENTER button to bring the volume setting bar and press the LEFT/RIGHT ARROW or VOL+/- buttons to adjust the value. By default the volume level is set to 50.
6.XLR Terminal Polarity: To set the polarity of the BALANCED STEREO AUDIO OUT terminals on
ξNormal – The XLR
ξInversion – The positions of “hot” (positive) and “cold” (negative) pins on your audio system are switched comparing with those on
7.Stereo Signal: To select the audio source that will be processed and sent out through the STEREO and the XLR BALANCED STEREO audio terminals. The available options are:
ξ
ξFront Left/Right – The original Front Left (FL) and Front Right (FR) signals are sent out from the dedicated stereo output terminals. The purpose is to fully utilize the better DAC hardware originally assigned to the dedicated stereo outputs for customers who prefer multi- channel speakers and do not need the dedicated stereo output or zone 2 output. When this option is selected, the dedicated stereo output ports should be used as the Front outputs of the 7.1ch / 5.1ch / Stereo Audio group. The original FL/FR RCA connectors should not be connected.
74