Parrot DMP-BD80 operating instructions Display, Dts/Dts-Hd

“Sound”

Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]			≥On		≥Off
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)			≥Auto:	Effective only when Dolby TrueHD is played.
Change the dynamic range (		42) for late night viewing.
Digital Audio Output ( 20)
≥Press [OK] to show the following settings.
	Dolby D/Dolby D +/	Select whether Dolby Digital, Dolby	≥Bitstream:
	Dolby TrueHD	Digital Plus, Dolby TrueHD, DTS	Select “Bitstream” when the connected equipment can decode the
		Digital Surround, DTS-HD High	respective audio format.
	DTS/DTS-HD
		Resolution Audio or DTS-HD Master	– Connect equipment supporting HDMI (High Bit rate Audio) and use a
		Audio is output in “Bitstream” or	High Speed HDMI Cable in order to output high bit rate audio such as
		“PCM” format.	Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or
		[Note]	DTS-HD Master Audio.
			≥PCM:
		≥Not making the proper settings may
		result in noise.	Select “PCM” when the connected equipment cannot decode the
			respective audio format.
		≥If the unit is connected with the HDMI AV
		OUT terminal, the specifications of the	Refer to the operating instructions for connected devices to verify whether
		connected equipment take preference
			or not they can decode each of the audio formats.
		over this unit and audio selected in these
		items may not be output (e.g., when a
		television is connected, the HDMI audio
		output of this unit is limited to
		down-mixed 2ch.)
	MPEG Audio		≥Bitstream:		When connected to equipment with a built-in MPEG
			≥PCM:		decoder.
					When connected to equipment without a built-in MPEG
					decoder.
	BD-Video Secondary Audio [BD-V]		≥On:	The primary audio and secondary audio are mixed and output.
	Turn on/off the clicking sound on the menu and audio with			The sampling frequency is converted to 48 kHz.
	secondary video in picture-in-picture mode. ( 19)		≥Off:	The clicking sound on the menu and secondary audio are not
				output.
PCM Down Conversion			≥On:	Signals are converted to 48 kHz. (Choose when the connected
Select how to output audio with a sampling frequency of 96 kHz.				equipment cannot process signals with sampling frequency of
≥Signals are converted to 48 kHz despite the settings across in the				96 kHz.)
	following cases:		≥Off:	Signals are output as 96 kHz. (Choose when the connected
	– when the signals have a sampling frequency of 192 kHz			equipment can process signals with sampling frequency of
	– when the disc has copy protection			96 kHz.)
	– when “BD-Video Secondary Audio” is set to “On”
Downmix			≥Stereo:		When connected to equipment that does not support
Switch the downmix system for playing back multi-channel					the virtual surround function.
surround sound.			≥Surround encoded: When connected to equipment that supports the
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set					virtual surround function.
	to “Bitstream”, there are no downmix effects for the outputted
	audio.
≥The audio will be outputted in “Stereo” in the following cases.
	– AVCHD playback
	– Playback of clicking sound on the menu and audio with
	secondary video in picture-in-picture mode
High Clarity Sound [BD80]			≥Enable		≥Disable
When the analog video terminal is not being used, the electrical
current that flows through the analog video circuit can be stopped.
This prevents adverse effects on the audio signals and produces
clearer sound.
≥Set to “Enable” and then set “High Clarity Sound” on the
	on-screen menu to “On”. (	27)
≥Use this when outputting image via HDMI terminal. Analog image
	will not be output via COMPONENT VIDEO OUT terminal or
	VIDEO OUT terminal.

“Display”

On-Screen Messages	≥Automatic	≥Off
Choose whether to show status messages automatically.
On-Screen Language	≥English	≥Français	≥Español
Choose the language for these menus and on-screen messages.	≥Deutsch	≥Italiano	≥Nederlands
Screen Saver Function	≥On:
This is to prevent burn-in on the screen.	If there is no operation for 10 minutes or more, the displayed screen
≥When this is set to “On”, the masked-off area on the screen	switches to the other states automatically.
becomes gray.	– When the Direct Navigator or FUNCTIONS menu is displayed, the
[Only when connecting with an HDMI cable or a component	display returns to the screen saver mode.
video cable and “HDMI Video Format” ( 31) is set to any other	– When CD or MP3 is played, the display returns to the screen saver
mode than “576p/480p”, or “Component Resolution” ( 31) is	mode. (Playback continues.)
set to “720p” or “1080i”]	– When still pictures are shown (except for slideshow), the display returns
	to the Direct Navigator screen.
	≥Off
FL Display	≥Bright
Changes the brightness of the unit’s display.	≥Dim:	The display is dimmed.
	≥Automatic:	The display is dimmed during playback and bright
		except playback.
[BD80]	≥On	≥Off
SD Card LED Control	≥SD inserted:	When this unit is turned on and SD card is inserted, the
Set the lighting method for the lamp on the SD card slot.		lamp is lighted.
Software Licence	Information about the software used by this unit is displayed.

RQT9401

30