Parrot DMP-BD80 operating instructions Network, Other difficulties with playback

Page 41
Remote Control Set Code 1 Set Code 2 Set Code 3
Press[] and [OK] together for more than 5 seconds on the remote.

Network

 

Page

 

 

 

I can’t connect to the network.

≥Has the LAN cable come unplugged? Check that the LAN cable is properly connected.

13

 

≥Have you plugged in a modular cable for use with a telephone into the LAN terminal on this

13

 

unit? Connect with a straight LAN cable.

—

 

≥Is the power for the modem or broadband router turned on? Turn the power on for each

 

device.

—

 

≥Is there a mistake in the network settings? Follow any instructions you may have received

 

from your ISP (Internet Service Provider) and make changes to the settings.

—

 

≥Are the broadband router settings correct? Read the operating instructions for the broadband

 

router.

—

 

≥Is the broadband router and/or modem correctly connected? Check the operating

 

instructions for each device and connect accordingly.

29, 32

 

≥Check the “Network Settings” and “BD-Live Internet Access” settings.

While using my PC, I cannot

≥Does your Internet Service Provider (ISP) or service contract prevent multiple terminals

—

connect to the network.

connecting at the same time? Check the content of your contract.

 

VIERA CAST does not operate

≥Is the network connection correct?

13

or connect.

≥Image of the video contents may be disturbed or may not display depending on how busy the

—

 

environment or the connected line is.

 

Other difficulties with playback

 

 

 

 

Audio and video momentarily

≥This occurs between playlist chapters or scenes ([AVCHD]).

—

pause.

≥When playing a title recorded on both layers, the unit automatically switches between layers

—

 

and plays the title in the same way as a normal program. However, video and audio may

 

 

momentarily cut out when the unit is switching layers.

 

BD-Video or DVD-Video is not

≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is

Cover

played.

not defective.

29

 

≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.

 

≥Some BD-Video can only be output with HDMI.

—

Picture-in-picture is not played

≥Confirm whether the disc supports picture-in-picture.

—

with BD-Video.

 

 

The BD-Live is not played with

≥Confirm whether the disc supports the BD-Live.

19

BD-Video.

≥The inserted SD card does not have sufficient available capacity.

—

 

≥The SD card is write-protected.

7

 

≥Sub contents copied to an SD card are provided by the disc producer as a part of the

19

 

BD-Video content. Even if you record images and audio onto an SD card, it cannot be played

 

 

as a BD-Live.

 

Alternative soundtrack and

≥The languages are not recorded on the disc.

—

subtitles cannot be selected.

≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on

16

 

some discs. Use the disc’s menus to make changes.

 

No subtitles.

≥Subtitles are not recorded on the disc.

—

 

≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.

26

Angle cannot be changed.

≥Angles can only be changed during scenes where different angles are recorded.

—

The resume play function does

≥Memorized positions are canceled when

—

not work.

– pressing [∫] several times.

 

 

– opening the disc tray.

—

 

≥The resume play function may not work depending on the disc.

 

≥[BD-V]: On BD-Video discs including BD-J, the resume play function does not work.

—

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together.

1Press [SETUP].

2Press [3, 4] to select “General” and press [OK].

3Press [3, 4] to select “Remote Control” and press [OK].

4 Press [3, 4] to select the code (1, 2, or 3) and press [OK].

5To change the code on the remote control

While pressing [OK], press and hold the numbered button ([1], [2] or [3]) for more than

5seconds. 6 Press [OK].

When the following indicator appears on the unit’s display and you are unable to operate the unit

NOTE

The unit’s remote control code

Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.

Reference

RQT9401

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Illustration shows the image of DMP-BD80 Region management informationBD-Video DVD-Video ExampleSafety precautions Unit and media care MaintenanceDisc and card handling To dispose or transfer this unitTable of contents Using the remote control Accessory informationWhen closing the lid, insert it from the j minus side Batteries UseRecorded discs Media Disc, card and USB device informationPackaged discs Discs that cannot be played SD cardsUSB device Connecting to Hdmi AV OUT terminal Connecting to a televisionConnecting to Component Video OUT terminal ConnectionConnecting to 7.1ch Audio OUT terminal BD80 Connecting to Video OUT terminalConnecting AC mains lead Connecting to 5.1ch Audio OUT terminal BD80Connecting to Digital Audio OUT terminal Standby/on switch Í/I Switch on/off Secondary AudioControl reference guide Basic playback control buttonsFor amplifiers/receivers Easy SettingSetting the television and amplifier/receiver operation Firmware updating Network connectionInternet Back of the unit Straight LAN cable not included Manually updating the firmwareNetwork settings Testing of Proxy Server Settings Setting the connection speedSetting the proxy server Press 3, 4 to select Proxy Address and press OKInserting or removing a media Playing video contentsBasic operation Skip Skip SLOW/SEARCH Search/Slow-motionStarting from a selected item OK Frame-by-framePlaying HD Video or SD Video Chapter playbackEnjoying BD-Live discs with Internet Enjoying BD-LIVE or Bonusview in BD-VideoAbout audio from audio output terminal Enjoying High Bit rate Audio and VideoRegarding 24p output Necessary Connections ≥HDMI AV OUT terminalInsert a disc or USB device Playing musicPress 3, 4 to select the track and press OK MP3 Playing a track in another folderPress 3, 4, 2, 1 to select the album and press OK Playing still picturesPress 3, 4, 2, 1 to select the still picture and press OK DVD-R/R DL, CD-R/RW, SD card, USB deviceUseful functions during still picture play Playing DivX videos Regarding DivX VOD contentDisplaying subtitles text Insert a disc or a USB deviceShowing Functions menu Enjoying Viera CasttmWhat you can change with the on-screen menu Changing settings with the on-screen menuOn-screen menu operations Sound PlayPicture What you can do with Hdavi Control Easy control only with Viera remote controlLinked operations with the TV Setup menu operations Changing the unit’s settingsSummary of settings Press 3, 4, 2, 1 to select the option and press OKDTS/DTS-HD DisplayTV/Device Connection Viera Cast Network SettingsGeneral Delay time ms Changing the speaker setting to suit your speakers BD80To finish the speaker setting Speaker presence and size L C R SW LS RS LB RBMP3 Jpeg About MP3/JPEG/DivX filesBD-RE/DVD-RAM Structure of folders that can play back on this unitOn the television MessagesOn the unit’s display To reset this unit Troubleshooting guidePower OperationTV screen and video DisplaysCard Hdmi connectionsOther difficulties with playback NetworkAvchd GlossaryBD-J DTS-HDLAN Local Area Network Jpeg Joint Photographic Experts GroupLocal storage Lpcm Linear PCMNorsk SpecificationsReference Tämä Laite on Tarkoitettu Käytettäväksi Leudossa Ilmastossa Suomi VaroitusMemo Angle Audio IndexIP address , 42 J Jpeg , 34 LAN , 43 Language Noise reduction NR
Top Page Image Contents