Parrot DMP-BD80 operating instructions Displays, TV screen and video

Page 39

Displays

Page

The display is dim.

The elapsed time displayed is actually less than the play time.

≥Change “FL Display” in the Setup menu.

≥The displayed play time is converted from the number of frames at 29.97 frames (equal to 0.999 seconds) to one second. There will be a slight difference between the time displayed and the actual elapsed time (e.g., actual one-hour elapsed time may display as approximately 59 minutes 56 seconds).

30

—

TV screen and video

The images from this unit do

≥Make sure that the television is connected to the VIDEO OUT terminal, COMPONENT

8, 9

not appear on the television.

VIDEO OUT terminals or HDMI AV OUT terminal on this unit.

—

 

≥Make sure that the television’s input setting (e.g., AV 1) is correct.

Picture is distorted.

≥An incorrect resolution is selected in “Component Resolution”, when the television is connected to

31

 

COMPONENT VIDEO OUT terminals. While stopped, press and hold [∫] and [1] (PLAY) on the

 

 

main unit at the same time for more than 5 seconds to cancel this setting. Set the item again.

31

 

≥If “24p Output” is set to “On” when the unit is connected to a TV through any terminal other

 

than HDMI, images may not display properly. In this case, set “24p Output” to “Off”.

—

 

≥The unit and television are using different video systems. While stopped, keep pressing [∫]

 

and [< OPEN/CLOSE] on the main unit for 5 or more seconds. The system switches from

 

 

PAL to NTSC or vice versa.

 

 

≥The system used on the disc doesn’t match your television.

—

 

– PAL discs cannot be correctly viewed on an NTSC television.

 

– This unit can convert NTSC signals to PAL60 for viewing on a PAL television (“NTSC

29

 

Contents Output” in the “Picture”).

—

 

≥[DivX] Images may not be output due to how files were created.

 

 

 

Played back image is distorted

≥High definition video (transfer rate of 18 Mbps or faster) cannot be played back correctly if it

—

or does not playback correctly.

was recorded on a DVD compatible to double speed or slower.

 

([AVCHD])

 

 

 

 

 

Picture stops.

≥[DivX] Picture may stop if the DivX files are greater than 2 GB.

—

The screen changes

≥When the “Screen Saver Function” in the Setup menu is set to “On”, the display may return to

30

automatically.

the screen saver mode automatically if there is no operation for 10 minutes or more.

 

 

 

 

.

≥An image is not output from the COMPONENT VIDEO OUT terminal or the VIDEO OUT

27

Video is not output

terminal when the “High Clarity Sound” is enabled. Set the “High Clarity Sound” in the

 

 

on-screen menu to “Off” to use the COMPONENT VIDEO OUT terminal or the VIDEO OUT

 

 

terminal.

 

Video is not output in high

≥High definition video cannot be output through the VIDEO OUT terminal.

—

definition.

≥Confirm that the “HDMI Video Mode”, “HDMI Video Format”, and “Component Resolution” in

31

 

the Setup menu are set properly.

—

 

≥The video output resolution is restricted to “576p/480p” when DVD-Video discs, DivX and

 

BD-Video discs recorded at a rate of 50 field per second are output from the COMPONENT

 

 

VIDEO OUT terminals.

 

 

 

 

Status messages do not appear.

≥Select “Automatic” in “On-Screen Messages” in the Setup menu.

30

The 4:3 aspect ratio picture

≥Use the television to change the aspect. Refer to your television’s operating instructions.

—

expands left and right.

≥When using a component video cable, set “Progressive” to “Video”. If the situation is not

27, 31

Screen size is wrong.

restored after that, set “TV Aspect” to “4:3 Pan & Scan”.

 

 

 

 

 

 

There is a lot of after-image

≥Turn “3D NR” or “Integrated NR” off if it is on.

27

when playing video.

 

 

There is no apparent change in

≥The effect is less perceivable with some types of video.

—

picture quality when adjusted

 

 

with the “Picture” menu in the

 

 

on-screen menu.

 

 

The masked-off area is masked

≥If the “Screen Saver Function” in the Setup menu is set to “Off”, the masked-off area is

30

in gray.

displayed in black.

 

Still pictures (JPEG) do not

≥The images that were edited on the PC, such as Progressive JPEG, etc., may not playback.

34

playback normally.

 

 

Reference

RQT9401

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents DVD-Video Example Region management informationIllustration shows the image of DMP-BD80 BD-VideoSafety precautions To dispose or transfer this unit MaintenanceUnit and media care Disc and card handlingTable of contents Batteries Use Accessory informationUsing the remote control When closing the lid, insert it from the j minus sideMedia Disc, card and USB device information Packaged discsRecorded discs SD cards USB deviceDiscs that cannot be played Connection Connecting to a televisionConnecting to Hdmi AV OUT terminal Connecting to Component Video OUT terminalConnecting to 7.1ch Audio OUT terminal BD80 Connecting to Video OUT terminalConnecting to 5.1ch Audio OUT terminal BD80 Connecting to Digital Audio OUT terminalConnecting AC mains lead Basic playback control buttons Switch on/off Secondary AudioStandby/on switch Í/I Control reference guideEasy Setting Setting the television and amplifier/receiver operationFor amplifiers/receivers Manually updating the firmware Network connectionFirmware updating Internet Back of the unit Straight LAN cable not includedNetwork settings Press 3, 4 to select Proxy Address and press OK Setting the connection speedTesting of Proxy Server Settings Setting the proxy serverPlaying video contents Basic operationInserting or removing a media OK Frame-by-frame SLOW/SEARCH Search/Slow-motionSkip Skip Starting from a selected itemPlaying HD Video or SD Video Chapter playbackEnjoying BD-Live discs with Internet Enjoying BD-LIVE or Bonusview in BD-VideoNecessary Connections ≥HDMI AV OUT terminal Enjoying High Bit rate Audio and VideoAbout audio from audio output terminal Regarding 24p outputMP3 Playing a track in another folder Playing musicInsert a disc or USB device Press 3, 4 to select the track and press OKDVD-R/R DL, CD-R/RW, SD card, USB device Playing still picturesPress 3, 4, 2, 1 to select the album and press OK Press 3, 4, 2, 1 to select the still picture and press OKUseful functions during still picture play Insert a disc or a USB device Regarding DivX VOD contentPlaying DivX videos Displaying subtitles textShowing Functions menu Enjoying Viera CasttmChanging settings with the on-screen menu On-screen menu operationsWhat you can change with the on-screen menu Play PictureSound Easy control only with Viera remote control Linked operations with the TVWhat you can do with Hdavi Control Press 3, 4, 2, 1 to select the option and press OK Changing the unit’s settingsSetup menu operations Summary of settingsDTS/DTS-HD DisplayTV/Device Connection Network Settings GeneralViera Cast Speaker presence and size L C R SW LS RS LB RB Changing the speaker setting to suit your speakers BD80Delay time ms To finish the speaker settingMP3 Jpeg About MP3/JPEG/DivX filesBD-RE/DVD-RAM Structure of folders that can play back on this unit On the television MessagesOn the unit’s display Operation Troubleshooting guideTo reset this unit PowerTV screen and video DisplaysCard Hdmi connectionsOther difficulties with playback NetworkDTS-HD GlossaryAvchd BD-JLpcm Linear PCM Jpeg Joint Photographic Experts GroupLAN Local Area Network Local storageNorsk SpecificationsReference Tämä Laite on Tarkoitettu Käytettäväksi Leudossa Ilmastossa Suomi VaroitusMemo Noise reduction NR IndexAngle Audio IP address , 42 J Jpeg , 34 LAN , 43 Language
Top Page Image Contents