Chapter 3 - Setting Defaults
5.Define the following parameters:
Table 3-4: Participant Defaults - Settings2 parameters
Option | Description |
|
|
Aggregation | This field applies to ISDN connections only. Select |
| the aggregation method: |
| H221 – The standard communication protocol, in |
| which a different phone number is assigned to |
| each channel. |
| Bonding - A communication protocol that |
| aggregates from two up to thirty |
| channels together to look like one large bandwidth |
| channel. |
| |
| channels are aggregated to form one dedicated |
| line. The MGC Manager currently supports |
| aggregation of 6 channels to form one line of 384- |
| Kbps rate (64 X 6=384). In such a case, the |
| network ensures that all six channels are |
| synchronized and there are no intervals between |
| the arrivals of the data packets. |
| Auto – Click this option to connect the participant |
| according to his/her capabilities. When connecting |
| to the conference, the endpoint and the MCU |
| exchange capabilities. During this exchange, the |
| MCU identifies the aggregation mode used by the |
| endpoint and connects it accordingly. |
|
|
Number of | This field applies only to ISDN/ATM connections. |
Channels | Indicate the number of channels the participant |
| uses for the connection. |
| Select “auto” to use the conference’s Line Rate |
| setting. This is also the mode recommended for |
| ATM conferences. |
| Select the appropriate number of channels to |
| force the system to use the participant settings. |
|
|
