Chapter 3 - Setting Defaults
Table 3-3: Participant Defaults - Settings1 Parameters (Continued)
Option | Description |
|
|
Participant Phone | This field applies to the |
Numbers | connection type, or to ISDN, |
| MCU option (when selected). Type the |
| participant’s phone number (including country and |
| area codes when required) to be dialed by the |
| operator when connecting the participant to the |
| conference. Add a semicolon (;) between |
| numbers when several numbers are to be |
| assigned to a participant. For example, |
| 92511111;9251112;….;xxxx. |
| If the Meet Me Per MCU option is selected, type |
| the phone number by which the participant is |
| identified (CLI number). This number is used by |
| the MCU to route the caller to the appropriate |
| conference. |
|
|
MCU Numbers | This field applies only to the ISDN, |
| Me per |
| the phone number the participant should dial to |
| connect to the MCU. |
| If left blank, the MCU automatically assigns a dial- |
| in number (from the list of dial in numbers defined |
| in the Network Service) when the conference |
| starts. |
|
|
Participant | This field applies only to the ISDN, |
Bonding | connection type, and should be used only if |
| Bonding is the selected Aggregation type for the |
| participant. |
| Enter a single number for all the aggregated |
| channels. The system will automatically assign |
| the appropriate phone numbers to the remaining |
| channels. |
| If left blank, the MCU automatically assigns the |
| first number that appears in the Participant Phone |
| Number field when the conference starts. |
|
|
