MGC Web Server Manager User’s Guide
Table 3-4: Participant Defaults - Settings2 parameters (Continued)
Option | Description |
|
|
Video Protocol | Select the Video compression standard: |
| H261 – The video compression standard |
| mandatory to all codecs. |
| H263 - A compression standard that provides |
| improved video quality at a line rate lower than |
| 384 Kbps. This standard is not supported by all |
| codecs. |
| Auto - select this option to use the conference’s |
| Video Protocol settings. |
|
|
Voice | This field applies to ISDN and H.323 connections. |
| Select Data for data, audio and video transmission |
| (using the H.221 protocol). |
| For audio only transmission, select Voice. This |
| option is automatically selected for |
| participants. |
|
|
Recording | You can designate one participant designated as a |
| recording port (that is, a telephone to which a |
| recording device may be connected). The |
| recording port is used to record the audio |
| conference. |
| Select None for a standard participant. |
| Select |
| recording port. |
|
|
Auto Detect | This field applies only to ISDN connections. Check |
| this option to enable the automatic detection of the |
| line rate of incoming ISDN calls by the MGC |
| WebCommander and connect the participant |
| accordingly without prior settings of the line rate |
| during conference setup. The participant can be |
| connected in a line rate of up to the line rate set for |
| the conference. |
|
|
