MGC Web Server Manager User’s Guide
Table 3-4: Participant Defaults - Settings2 parameters (Continued)
Option | Description |
|
|
Encryption | In the Participants Defaults - Settings2 you can |
| select the appropriate Encryption default setting - |
| Auto/On/Off. |
| Choose any of the following Encryption options: |
| • Auto - When participants connect to a |
| conference, the conference/Entry Queue |
| encryption settings are automatically applied |
| to the participant. For example, when a |
| conference/Entry Queue is set to encryption |
| the participant is also encrypted (if the flag in |
| the MGC Manager |
| ALLOW_ENCRYPT_IN_PARTY_LEVEL is set |
| to YES). |
| • On - enables encryption at the participant |
| level (if the flag MGC Manager |
| ALLOW_ENCRYPT_IN_PARTY_LEVEL is set |
| to YES). |
| • Off - disables encryption |
| Note: Undefined participants are connected with |
| the Participant Encryption option set to Auto, |
| inheriting the Conference/Entry Queue encryption |
| setting. |
|
|
Restrict Only | This field applies only to ISDN connections. Select |
| this check box if the participant is using a |
| restricted line whose transfer rate per channel is |
| 56 Kbps (instead of 64 Kbps). This option is valid |
| for a Transcoding or Continuous Presence |
| conference only. |
|
|
H323 Participant - | Enter the default IP address for endpoints. |
Participant IP |
|
Address |
|
|
|
H323 Participant - | This field should not be modified unless a different |
Signaling Port | signaling port was configured during installation |
| and connection to the network. |
|
|
H323 Participant - | Select the participant’s alias type and then enter |
Alias Name | the alias of the endpoint. |
|
|
