MGC Web Server Manager User’s Guide

Connecting/Disconnecting to/from an MCU

Once the MCUs are defined in the database, you can connect to an MCU. This step is mandatory in order to run conferences, and it can be performed only after the MGC Web Server Manager is connected to the MGC Web Server. If all MCUs or the MGC Web Server are disconnected, remote users cannot run conferences via the Web. For more details on how to define a new MCU, see Chapter 5, “Defining an MCU” on page 5-1.

Connecting to an MCU

To connect to an MCU:

1.In the Browser area, click the Server icon to display the list of MCUs currently defined in the MGC Web Server Manager application.

The MCUs list contains all the MCUs currently defined in all the databases set in the Web Server Manager application. If the same MCU is defined in two databases, it will appear twice in the MCUs list.

2.In the Status area, right-click the MCU icon and then click Connect.

The system connects to the selected MCU. The MCU status that appears in the Status area changes first to Connecting, during the connection procedure and then to Normal at the end of the connection procedure.

2-13

Page 25
Image 25
Polycom MGC WebCommander Version 9.0 Connecting/Disconnecting to/from an MCU, Connecting to an MCU, To connect to an MCU