Panasonic DMP-BDT105 Recommended audio output setting, For details of the each item, refer to

Recommended audio output setting

The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items.

Press [FUNCTION MENU] > select “Other Functions” > [OK] > select “Setup” > [OK] > select “Audio” > Set each item

For details of the each item, refer to page 29.

				Example of connected equipment
				Receiver with	Receiver without	Receiver via
	Setup menu		TV via HDMI*1	HD audio*2 decoder	HD audio*2 decoder	OPTICAL
				via HDMI	via HDMI
		“Dolby D/Dolby D	“PCM”	“Bitstream”	“PCM”	“PCM”
“Digital		+/Dolby TrueHD”
Audio		“DTS/DTS-HD”	“PCM”	“Bitstream”	“PCM”	“PCM”
Output”		“BD-Video	“Off”	“Off”	“Off”	“Off”
		Secondary Audio”
“PCM Down Conversion”			No effect	No effect	No effect	“Off”*3
	“Downmix”		“Stereo”	No effect	No effect	“Stereo”*4

≥Because underlined items are the factory presets, it is not necessary to change these settings.

*1 If connected to TV via the OPTICAL or AUDIO OUT terminal, these settings have no effect.

*2 HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio *3 If the connected equipment that does not support 96 kHz, set to “On”.

*4 If the connected equipment that supports the virtual surround function, set to “Surround encoded”.

Reference

VQT2U33 37