Accessory
Check the supplied accessories before using this unit.
1Remote control (N2QAKB000076)
1Audio/Video cable (K2KYYYY00048)
2Batteries for remote control
1 AC power supply cord (K2CB2CB00022)
1[BDT105] HDMI cable (K1HA19DA0005)
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit.
≥Product numbers correct as of June 2010. These may be subject to change.
≥Do not use AC power supply cord with other equipment.
≥Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 44. For Canada: To order accessories, call the dealer from whom you have made your purchase.
Using the remote control
Insert so the poles (i and j) match those in the remote control.
R6/LR6, AA
(Alkaline or manganese batteries)
Point it at remote control signal sensor on this unit. (> 5)
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
≥Do not mix old and new batteries or different types at the same time.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.
≥Do not take apart or short circuit.
≥Do not attempt to recharge alkaline or manganese batteries.
≥Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Unit and media care
∫Clean this unit with a soft, dry cloth
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the instructions that came with the cloth.
∫Clean the lens with the lens cleaner disc
Lens cleaner disc:
≥This lens cleaner is sold as specific for DIGA, but can be used on this unit as well.
∫Clean discs
DO | DO NOT |
Wipe with a damp cloth and then wipe dry.
∫Disc and card handling precautions
≥Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.
≥Do not attach labels or stickers to discs.
≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.
≥Clean any dust, water, or foreign matter from the terminals on the rear side of the card.
≥Do not use the following discs:
–Discs with exposed adhesive from removed stickers or labels (rented discs etc).
–Discs that are badly warped or cracked.
–Irregularly shaped discs, such as heart shapes.
∫To dispose or transfer this unit
The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (>32, “To return all settings to the factory preset.”)
≥The operation history may be recorded in the memory of this unit.
4 VQT2U33