Panasonic DMP-B500 operating instructions Reference

Page 45

Cannot obtain IP address using DHCP.

Please check the connection or router settings.

¾If you use a hub, then check the connection between the hub and the router.

jUse the UPLINK port of the hub to connect to a router. (> 31)

jCheck whether or not the hub’s Link lamp lights up. If it does not light up, then check the cable connection, LAN terminal connection, cable itself (a crossover cable may have been used by mistake), etc.

¾If the above conditions are OK, then the router may not operate in DHCP mode. Check the router settings and operation. You may reset the router to restore it to normal.

This IP address is already in use.

Please check the IP address setting.

¾This unit’s IP address is used by another device. Check the IP addresses of this unit, personal computers, and routers, etc. If necessary, reconfigure them to avoid IP addresses from being duplicated.

Unable to perform Connection Test.

Please try again.

IP address not set correctly.

¾Turn the unit off. Disconnect the power source (the AC adaptor or battery pack) and reconnect it and try again. If the same symptom persists, then consult your dealer.

Connection Test was unsuccessful. No reply from host.

Please check the connection or router settings.

¾If you use a hub, then check the connection between the hub and the router. (> 31)

jUse the UPLINK port of the hub to connect to a router. jIf the hub’s Link lamp does not light up, then check the

cable connection, LAN terminal connection, cable itself (a crossover cable may have been used by mistake), etc.

¾Check the “IP Address”, “Subnet Mask”, and “Default Gateway” in the “IP Address / DNS Settings”. (> 39)

¾If the MAC address information is required, then press [SETUP] to display the “Network” menu. (> 39)

Cannot connect to network.

Please confirm Network Settings or BD-Live

Internet Access in Setup.

¾When you set “BD-Live Internet Access” to “Allow ( Limited )” and play BD-Live contents which do not have a content owner certificate, the Internet access of the content is not allowed. If you allow the content to connect to Internet, set “BD-Live Internet Access” to “Allow ( ALL )”. (> 37)

Reference

VQT2J81

(ENG)

45

Image 45

Contents If you have any questions contact Region management informationBD-Video Example DVD-VideoInside of product Important Safety InstructionsBatteries Battery pack Lithium ion battery packTable of contents Maintenance AccessoriesUnit and media care Disc and card handlingCommercially sold discs Media Disc, card and USB device informationUser recorded media RR/rRW/rR DLSD cards USB devicesDiscs that cannot be played in this unit Unit OverviewRemote control transmitter Remote controlInsert the batteries included Range of usePreparing the Power Supply Installation of the unitUsing the unit connected to the AC adaptor Using the battery packEasy Setting Turning on/off the unitTurn the unit off automatically Showing the Function Menu Adjusting the pictures on the LCD screenDisc Loading the disc, SD card or USB deviceUSB device SD cardBasic play Playing video contents To switch from other menus to shooting date To switch from other menus to Avchd or MPEG2 menuChanging the slideshow settings Select the date with 3, 4, 2, 1, and then press OKOther operations during play Chapter playbackStatus messages Direct PlayFrame-by-frame Screen AspectEnjoying BD-Live discs with Internet Enjoying BD-Live or Bonusview in BD-VideoPlaying music To switch from other menus to MP3 menuInsert a disc or USB device Press 3, 4 to select the track and press OKSwitching the display design Switching the display modeChanging the Photo Frame Timer Settings Changing the setting of Photo FrameUseful functions during still picture play Playing still picturesZoom out Press 3, 4, 2, 1 to select Set and press OK RotatePress SUB Menu Press 3, 4 to select Zoom out and press OK To select the still pictures in another folderPlaying DivX videos Regarding DivX VOD contentDisplaying subtitles text On-screen menu operations Changing settings with the on-screen menuWhat you can change with the on-screen menu Press DisplayPlay VideoAudio Start playback on this unit Using this unit with other equipmentPreparation Hdmi cable Not includedAutomatic input switching Setting Viera Link Hdavi ControlPower on link Power off linkUsing the Function Menu to operate this unit Easy control only with Viera remote controlUsing the sub menu to operate this unit Press SUB MenuConnecting to a broadband network Using LAN ethernet cableUsing Wireless LAN Adaptor Precautions of Wireless LAN Adaptor Network Easy SettingSetting for when this unit is used connected to a network For wireless LAN connectionWhen you experience problems with settings Firmware updates Enjoying Viera CastAutomatically check the firmware Manually updating the firmware Setup menu operations Changing the unit’s settingsSummary of settings Press 3, 4, 2, 1 to select the option and press OKStill Mode paused video BD-Live Internet AccessDivX Subtitle Text Seamless PlayDisplay TV Aspect / Hdmi Function SettingsNetwork Others About audio output Enjoying High Bit rate Audio and VideoEnjoying High Bit rate Audio of BD-Video ≥ Hdmi AV OUT terminalAbout MP3/JPEG/DivX/ AVCHD/MPEG2 files DivXSubtitles text file of DivX Structure of folders that can be played in this unit Indicators and screen messages IndicatorsScreen messages Reference To reset this unit Troubleshooting guidePower Visit our website to find a service centerOperation Connection SoundCard Photo FrameOther difficulties with playback NetworkSpecifications Licenses Particular PurposeMember of the public via our website below Glossary LAN Local Area Network Jpeg Joint Photographic Experts GroupLocal storage Lpcm Linear PCMAs of November Product or Part Name Parts LaborUser memo Date of PurchasePanasonic Product Limited Warranty Limited Warranty Only for CanadaIndex