Connecting to a TV with DVI Cable

Connecting

■ Depending on your TV, certain HDMI output resolutions may not work.

NOTE

■Please refer to the user's manual of your TV.

■If an HDMI or HDMI-DVI cable is plugged into TV, the Blu-ray disc player’s output is set to HDMI/DVI automatically within 10 seconds.

■If Component and HDMI are both connected, HDMI mode is automatically selected.

(If HDMI is connected in Component mode or video mode, the video output mode automatically switches to HDMI mode.)

■If you connect a Samsung TV to the Blu-ray disc player using an HDMI cable, the player can be easily operated using the TV remote control. (This is only available with Samsung TVs that support the Anynet+ feature.)(See pages 43~44)

•What is Anynet+?

Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the Anynet+ feature.

-If your Samsung TV has an logo, then it supports Anynet+ function.

-If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on automatically and switch to HDMI mode.

-If you turn on the player and press the Play button with a disc already inserted,the TV will immediately turn on and switch to HDMI mode.

•HDMI (High Definition Multimedia Interface)

HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.

Using HDMI, the Blu-ray disc player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

•HDMI connection description

HDMI connector - Supports video and digital audio data (LPCM or Bitstream).

-HDMI outputs only a pure digital signal to the TV.

-If your TV does not support HDCP (High- bandwidth Digital Content Protection), random noise appears on the screen.

•Why does Samsung use HDMI?

Analog TVs require an analog video/audio signal. However, when playing a BD/DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the Blu-ray disc player) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV.

•What is the HDCP?

HDCP (High-band width Digital Content Protection) is a system for protecting BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

1.Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray disc player to the DVI IN terminal of your TV.

2.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the AUDIO (red and white) IN terminals of your TV.

Turn on the Blu-ray disc player and TV.

3.Press the OUTPUT SELECT button on the front panel of the unit until the HDMI indicator lights. Make sure the unit is in Stop mode.

4.Press the input selector on your TV remote control until the DVI signal from the Blu-ray disc player appears on your TV screen.

•If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select HDMI as the external source of the TV.

WHITE

LAN

RED

HDMI-DVI cable (not included)

Audio Cable

RED WHITE

18 - English