Samsung AK68-01357B, 20070320082319250 PCM Down Sampling, Digital Output, Dynamic Compression

4 Press the …† buttons to select the desired audio option from the options described below, then press the ENTER or √ button.

5 Press the …† buttons to select the desired item, then press the ENTER button.

■ Press the RETURN or œ button to return

PCM Down Sampling

•On : Select this when the Amplifier connected to the player is not 96KHz compatible. 96KHz signals will be down converted to 48KHz

•Off : Select this when the Amplifier connected to the player is 96KHz compatible. Signals will be output without any changes.

BD Player	Audio Setup
BD
Title Digital Output	: PCM	√

NOTE

to the previous menu.

Press the MENU button to exit the menu.

	PCM Down Sampling	: On	√
Music
	Dynamic Compression	: On	√
	Speaker Setup		√
Photo
Setup

Digital Output

•PCM : Select this when your equipment does not decode Dolby Digital.

•Bitstream : Outputs Dolby Digital or MPEG-2 or DTS audio as Bitstream. Select this when your AV receiver or AV amplifier has a Dolby Digital or MPEG-2 or DTS Decoder.

BD Player			Audio Setup
BD
Title	Digital Output		: PCM	√
	PCM Down Sampling		: On	√
Music
	Dynamic Compression		: On	√
	Speaker Setup			√
Photo
Setup
MOVE	SELECT	RETURN		EXIT

■ If you have selected a LPCM sound track on a

NOTE disc, the output will automatically be set to PCM.

■Be sure to select the correct Digital Output or you will hear no sound or a loud noise.

■When playing a Dolby Digital movie make sure the Digital Output is set to Bitstream.

MOVE SELECT RETURN EXIT

■Even when PCM Down Sampling is set to Off,

some discs will only output downsampled

NOTE audio through the digital outputs.

■During disc playback, press the Stop button twice (resuming playback is disabled) before setting PCM Down Sampling. If you press the Stop button once (resuming playback is still enabled), you can’t set PCM Down Sampling as it is deactivated.

HDMI

•If your TV is not compatible with compressed multi- channel formats (Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.

•If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down Sampling to On.

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

•Off : You can enjoy the movie with the standard Dynamic Range.

•On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

BD Player			Audio Setup
BD
Title	Digital Output		: PCM	√
	PCM Down Sampling		: On	√
Music
	Dynamic Compression		: Off	√
	Speaker Setup			√
Photo
Setup
MOVE	SELECT	RETURN		EXIT

English - 39

System Setup