Samsung 1357B-BD-P1200-XAC manual Connecting to a TVVideo, Placed too close to the power cable

Connecting

Connecting to a TV(Video)

1.Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the VIDEO (yellow) /AUDIO (red and white) IN terminals of your TV.

2.Turn on the Blu-ray disc player and TV.

3.Press the OUTPUT SELECT button on the front panel

of the unit until the VIDEO indicator lights. Make sure the unit is in Stop mode.

4.Press the input selector on your TV remote control until the Video signal from the Blu-ray disc player appears on the TV screen.

•If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select VIDEO as the external source of the TV.

	■	Noise may be generated if the audio cable
		placed too close to the power cable.
NOTE	■	If you want to connect to an Amplifier,
		please refer to the Amplifier connection
		page. (See pages 20~22)
	■	The number and position of terminals may
		vary depending on your TV set. Please refer
		to the user's manual of your TV.
	■	If there is one audio input terminal on the TV,
		connect it to the [AUDIO OUT][left] (white)
		terminal of the Blu-ray disc player.
	■	If you set the OUTPUT SELECT to HDMI,
		the Video/S-Video and Component Out
		terminals will not output any signal.

Connecting to an Audio System (2 Channel Amplifier)

1.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the AUDIO (red and white) IN terminals of your Amplifier.

2.Using the video signal cable(s), connect the HDMI OUT, COMPONENT, S-VIDEO,or VIDEO terminals on the rear of the Blu-ray disc player to the HDMI IN, COMPONENT, S-VIDEO,or VIDEO terminal of your TV as described on pages 17 to 20.

3.Turn on the Blu-ray disc player, TV and Amplifier.

4.Press the input select button of the Amplifier to select the external input in order to hear sound from the Blu-ray disc player. Refer to your Amplifier's user manual to set the Amplifier's audio input.

WHITE

RED

Audio Cable

RED WHITE

2-Channel stereo amp

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.

20 - English