Toshiba BDX2000KU Hdmi Audio Out Setting, Audio signals output from Hdmi OUT jack, When BD Audio

FUNCTION SETUP

HDMI Audio Out Setting

When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the device to be connected. Refer to page 38. Normally, set it to “HDMI Multi(Normal)” so that the unit automatically picks and outputs the best audio format suited to your connected device.

Device to be connected	“HDMI Audio Out” setting	Output HDMI audio signal
Device compatible with Dolby Digital,		Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
		DTS, or DTS-HD bitstream are output from HDMI
Dolby Digital Plus, Dolby TrueHD, DTS or	HDMI Multi(Normal)
		OUT jack. Make the speaker settings on the
DTS-HD decoding
		connected AV amplifier, etc.
Device compatible with 3 or more channels		Multi-channel audio signals are output from
of audio inputs (not Dolby Digital, Dolby	HDMI Multi(LPCM)	HDMI OUT jack. Make the speaker settings with
Digital Plus, Dolby TrueHD, DTS or DTS-HD		the speaker setting items appear after you select
compatible)		“HDMI Multi(LPCM)”. Refer to page 38.
HDMI connection to a TV and digital audio		HDMI audio will be mute, and Dolby Digital / DTS
		bitstream or LPCM will be output from DIGITAL
connection (optical / coaxial) to an AV	Audio Mute
		OUT jack depending on “Digital Out setting”.
amplifier
		Refer to page 40.

Audio signals output from HDMI OUT jack

			“HDMI Audio Out” setting
		HDMI Multi(Normal)		HDMI Multi(LPCM)
Media	Recording format	When “BD Audio	When “BD Audio	When “BD Audio	When “BD Audio
		Mode” is set to “HD	Mode” is set to “Mix	Mode” is set to “HD	Mode” is set to “Mix
		Audio Output”	Audio Output”	Audio Output”	Audio Output”
	Dolby Digital	Dolby Digital	Dolby Digital	Multi LPCM	Multi LPCM
	Dolby Digital Plus	Dolby Digital Plus	Dolby Digital	Multi LPCM*1	Multi LPCM*2
BD-video	Dolby TrueHD	Dolby TrueHD	Dolby Digital	Multi LPCM*3	Multi LPCM*4
	DTS	DTS	DTS	Multi LPCM*7	Multi LPCM*7
	DTS-HD	DTS-HD	DTS	Multi LPCM*5,7	Multi LPCM*6,7
	LPCM	Multi LPCM	Multi LPCM	Multi LPCM	Multi LPCM
	Dolby Digital	Dolby Digital		Multi LPCM
DVD-video
	DTS	DTS		Multi LPCM
	LPCM	2ch LPCM		2ch LPCM
AVCHD	Dolby Digital	Dolby Digital		Multi LPCM
	LPCM	2ch LPCM		Multi LPCM
audio CD / MP3 /		2ch LPCM		2ch LPCM
Windows Media™ Audio
DTS-CD		DTS		Multi LPCM

*1) Full decoded.

*2) Only the independent substream is decoded.

*3) Dolby TrueHD stream is decoded.

*4) Only the Dolby Digital substream is decoded.

*5) Full decoded.

*6) Only the core substream is decoded.

*7) When audio source is Multi-channel, decoded as 7.1ch. However, number of the output audio channel will depend on the number of the connected speakers.

•If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel down-mixed LPCM depending on the capability of the connected device even if you select “HDMI Multi(Normal)” in “HDMI Audio Out” setting.

•When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the “HD Audio Output” even if the “BD Audio Mode” is set to “Mix Audio Output”.

Note

•The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected.

•Among the devices that support HDMI, some do not support audio output (e.g. projectors). In connections with device such as this unit, audio signals are not output from HDMI OUT jack.

•Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.

INTRODUCTION CONNECTIONS

PLAYBACK FUNCTION SETUP OTHERS

EN 39