Toshiba BDX2000KU owner manual How to navigate through Hdmi MultiLPCM, Speaker Size

FUNCTION SETUP

Speaker setting (Available when you have HDMI cable connected to HDMI OUT jack)

This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the most of its feature, set up your speakers appropriately by referring to the following table.

How to navigate through “HDMI Multi(LPCM)”:

INTRODUCTION

1)Use [K / L] to select your desired menu item then press [ENTER].

2)Use [K / L] to select your setting items.

•Press [RETURN] to go back to the previous screen.

3)Use [s / B] to select desired options. (Except for “Test Tone”, “Default” and setting options in “Speaker Size” setting.)

For setting options in “Speaker Size” setting: Press [ENTER] to select desired options.

For “Test Tone”:

Use [s / B] to select “Off”, “Manual” or “Auto”, then press [ENTER].

•The test tone will be output. If you select “Manual”, use [K / L] to select desired speaker, then use [s / B] to adjust the volume. If you select “Auto”, use [s / B] to adjust the volume of the speaker that outputs the test tone.

•If you want to stop the test tone, press [RETURN].

For “Default”:

Press [ENTER] to reset to the default.

4) Press [SETUP] to exit.

Front speaker (left)	Front speaker (right)
	Center speaker
	Subwoofer
Surround	Surround
speaker (left)	speaker (right)
Surround	Surround
back speaker	back speaker
(left)	(right)

e.g.) basic layout with 7.1-channel surround system

CONNECTIONS

PLAYBACK FUNCTION SETUP

<Speaker setting for the audio signal output from HDMI OUT jack>

Quick AHDMI Audio Out AHDMI Multi(LPCM)

Custom AAudio AHDMI Audio Out AHDMI Multi(LPCM)

Menu	Setting items	Options	Descriptions
Speaker Size	Front	Large*	Large:
Selects the desired			For the large speakers with strong low
		Small
speaker to set. Then			frequency reproduction capabilities.
	Center	Large*
change the setting by			Small:
		Small
referring to the			For the small speakers which do not provide
descriptions.	Subwoofer	On	strong bass sound.
	Surround	Large*	You cannot change the setting of
			“Subwoofer”.
		Small
			Speakers which are not supported by the
	Surround Back	Large*
			connected device will be displayed in gray.
		Small
	Default		Select “Default”, then press [ENTER] to reset
			“Speaker Size” setting to the default.

OTHERS

EN 41