FUNCTION SETUP
Setting items |
|
| Options |
| ||
Network Connection | Enable(Custom) | Proxy | Do Not Use* |
| Set the proxy server. | |
|
| Setting |
|
|
| In most cases, you can |
|
| Use |
| Proxy | ||
|
|
|
|
| Address | connect to the Internet |
|
|
|
|
|
| without using proxy server. |
|
|
|
|
| Proxy Port | |
|
|
|
|
|
| |
|
| Connection | Auto* |
|
| Set the connection speed. |
|
| Speed |
|
| In most cases, you can | |
|
| 10BASE Half |
| |||
|
|
|
|
|
| connect to the Internet |
|
|
| 10BASE Full |
| ||
|
|
|
| without making any changes | ||
|
|
| 100BASE Half |
| ||
|
|
|
| to the default setting. | ||
|
|
| 100BASE Full |
| ||
|
|
|
|
| ||
|
| Allow* |
| You can restrict Internet | ||
|
| Setting |
| access when | ||
|
| Limited Allow | ||||
|
|
|
|
|
| functions are used. |
|
|
| Prohibit |
| ||
|
|
|
|
| ||
|
| MAC Address |
|
|
| You can check the MAC |
|
|
|
|
|
| address. |
|
|
|
|
|
|
|
| Disable |
|
|
|
| Deactivate the network |
|
|
|
|
|
| connection. |
Software Update | Current Version: |
|
|
|
| |
Allows you to update this unit’s | Indicates the current firmware version. |
|
| |||
firmware. Refer to page 49. |
|
|
|
| ||
Disc Update: | No* |
|
| |||
| Allows you to update this |
|
|
|
| |
| unit’s firmware using a disc. |
|
|
| ||
| Yes |
|
| |||
HDMI CEC (REGZA - LINK)
You can control all HDMI CEC compatible components connected via an HDMI cable by simple button operations of the remote control of this unit. In order to enable the function, you need to set “HDMI CEC” to “On”.
One Touch Play
When the operations with following buttons of the remote control of this unit are performed, the TV will automatically be turned on and switched to the appropriate input channel.
Buttons for one touch play:
-[PLAY B]
-[TOP MENU] or [POP MENU / MENU] (when a disc is inserted in the unit)
Standby
When you press and hold [ON/STANDBY Q] for 2 seconds, it turns off the power of the TV first and then turns off the power of this unit.
When the connected HDMI CEC compatible display device is turned off, this unit may also turn off together.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit.
•This feature is available only when “Auto(XXXX)” is selected in “Player Menu” in the setup menu. (Refer to “Player Menu” on page 35.)
Receiving operational signal from TV’s remote control:
You can operate this unit with TV’s remote control. Check your TV owner’s manual for details.
•This function may not work properly depending on the connected TV.
•The available operation may differ depending on the TV’s remote control you use.
•Other components must be compatible with HDMI CEC in order to use this function.
INTRODUCTION CONNECTIONS
PLAYBACK FUNCTION SETUP OTHERS
EN | 45 |