Switching Subtitles Switching Audio Soundtrack

PLAYBACK

You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.

Switching Subtitles		Switching Audio Soundtrack

Some BD, DVD and AVCHD may have subtitles in 1 or more		Some BD, DVD, audio CD and AVCHD contain multiple
languages. For commercially available discs, the		audio streams. Those are often in different audio
supported languages can be found on the disc case.		languages or audio formats. For BD, available audio varies
Follow the steps below to switch the subtitle languages		depending on “BD Audio Mode” setting. Refer to page 38
during playback.		for more information.

INTRODUCTION CONNECTIONS

1During playback, press [SUBTITLE].

2Use [K / L] to select “Primary Subtitle”, “Secondary Subtitle” or “Subtitle Style”, then press [ENTER].


	Primary Subtitle	2 ENG/11
	Primary Subtitle	2 ENG/11
	Secondary Subtitle	2 ENG/11
	Subtitle Style	2/25

“Primary Subtitle”		: Sets the subtitle for the
		primary video.
“Secondary Subtitle”		: Sets the subtitle for the
		secondary video.
“Subtitle Style”		: Sets style of the subtitle.

3Use [K / L] to select your desired subtitle or style.

•Use [s / B] to switch between current subtitle setting and “Off”.

4Press [SUBTITLE] to exit.

1During playback, press [SUBTITLE].

2Use [K / L] to select your desired subtitle.

		1 ENG	/ 4

•Use [s / B] to switch between current subtitle setting and “Off”.

3Press [SUBTITLE] to exit.

Note

•Some discs will only allow you to change the subtitles from the disc menu or pop-up menu. Press [TOP MENU] or [POP MENU / MENU] to display the disc menu or pop-up menu.

•If 4-digit-language code appears in the subtitle menu, refer to “Language Code List” on page 55.

•If the disc has no subtitle language or subtitle style, “Not Available” will be displayed on the TV screen.

•During playback of the secondary video, the primary subtitle setting is not available except when there is no subtitle for the secondary video.

•If you select a language that has a 3-letter-language code, the code will be displayed every time you change the subtitle language setting. If you select any other languages, “---” will be displayed instead. (Refer to page 55.)

1During playback, press [AUDIO].

2Use [K / L] to select “Primary” or “Secondary” audio to set, then press [ENTER].

Primary

1	ENG	Dolby D	Multi-ch	/3
Secondary
2	ENG	Dolby D+	Multi-ch	/3

“Primary” : Sets the audio for the primary video.

“Secondary” : Sets the audio for the secondary video.

3Use [K / L] to select your desired audio stream channel.

•For “Secondary”, use [s / B] to switch between current audio setting and “Off”.

4Press [AUDIO] to exit.

1During playback, press [AUDIO].

2Use [K / L] to select your desired audio stream channel.

1 ENG Dolby D 3/2.1ch

48k

/ 3

e.g.) DVD-video

• For audio CD, you can select following options.

“Stereo” : Both right and left channels are active (stereo).

“L-ch” : Only left channel is active.

“R-ch” : Only right channel is active.

3Press [AUDIO] to exit.

•For DTS-CD (5.1 music disc), “DTS” will be displayed. (Selecting audio streams or channels is not available.)

PLAYBACK FUNCTION SETUP

OTHERS