Arcam BDP100 manual Customising CR104, Code Learning

Page 26

customising

the CR104

Code Learning

The CR104 comes with a complete library of preprogrammed codes. After you have set up the CR104 for your device, you may find that there are one or more functions on your original remote which do not have a place on the CR104 keypad. For convenience, the CR104 offers a Code Learning feature that allows you to copy up to 16 functions from an original remote control onto the CR104 keypad.

Before you start, make sure that:

<The original remote control is working correctly.

<The remotes are not pointing at your device.

<The remotes have new batteries.

<The remotes are not in direct sunlight or under strong fluorescent lights.

Learned functions are mode-dependent: You could theoretically assign up to eight different functions to a single key (the CR104 can handle a total of 16 learned functions).

Example: To copy the ‘text hold’ function from a TV remote onto the (key of your

CR104

1.Place both remotes on a flat surface, 2 to 5cm apart, with the IR ports facing each other.

2.On the CR104, press and hold Suntil the power LED blinks twice: * *.

3.Press 975. The power LED blinks twice:

* *.

4.On the CR104, press the device key that matches the ‘source’ device (e.g. if you’re learning a TV function, press a).

5.On the CR104, press the key to which you want to assign the learned function (e.g. (). The device key blinks rapidly.

6.On the original remote, press and hold the function key that you want to learn (e.g. Text HoLD) until the CR104 device key blinks twice: * *.

7.If you want to learn other functions from the same source device, simply repeat steps 5 and 6 pressing the next key you want to learn.

8.To exit Code Learning mode, press and hold S

until the device key blinks twice: **.

9.To use the learned function on the CR104, press the Device Mode key, followed by the function key.

In this example, you’d press afollowed by (

Shifted Learning

You can assign a learned function to a CR104 key without sacrificing its original function.

You can assign Shifted Learning functions to any key except for: Device Mode keys (e.g. a), S, or number keys (0to 9).

1.To assign a Shifted Learning function, simply follow Code Learning steps in the previous section. During step 5, press Sonce before you press the key to which you want to assign the learned function.

2.To access the shifted function, press Sand then the target key.

Important notes

<Once you start a Code Learning session, you have approximately 10 seconds to conduct each step. Any longer, and a timeout means that you’ll have to start the process again.

<The Learning feature is mode-specific – you can copy one feature per mode onto a key.

<The CR104 can learn approximately 16 functions in total.

<To replace a learned function, simply assign a new one to the same key.

<Learned functions are retained when you change batteries.

<If Code Learning fails, try altering the distance between the two remotes; make sure that the light in the area is not too bright.

To delete a learned function

1.Press and hold Suntil the power LED blinks twice: **.

2.Press 976. The power LED blinks twice: .

3.Press a Device Mode key once. For example, if you want to delete one of your learned TV functions, press a.

4.Press twice on the key you want to deassign. The handset blinks twice: **to confirm.

The original function of the CR104 is restored.

To delete a Shifted Learned function:

To delete a Shifted Learned function, press Sbefore you press the key to be deassigned (during step 4 above).

To delete All learned functions within a given Device Mode

1.Press and hold Suntil the power LED blinks twice: * *.

2.Press 976– the power LED blinks twice:

* *.

3.Press the appropriate Device Mode key twice.

E-26

Image 26 Arcam BDP100 manual Customising CR104, Code Learning
Contents BDP100 HAn d b o o k Blu-ray Disc playerSafety compliance Safety GuidelinesImportant safety instructions English ContentsWelcome Remote control and trigger inputs InstallationPower Placing the unit12V trigger input Power inletAnalogue audio output Coaxial digital outputMaking audio connections Using two video connections simultaneouslyMaking video connections Hdmi interface Connecting using HdmiTroubleshooting Hdmi About HdmiPlayable files Disc & file FormatsPlayable discs Region codingNetwork connection USB connectionTo skip chapters or tracks on a CD, press / or Basic OperationIntroduction On the front panel or 4 on the handsetUsing the remote control BDP100 is supplied with the CR104 universal remote controlControlling the BDP100 Select the source key firstPause playback. Press 4 to resume playback Advanced controlsFast rewind Starts playback Displays Search menu with Time, Title Track optionsDevice Mode / Source keys Useful informationControlling other devices Code blink-backSubtitles Disc Information MenusSoundtrack Selection SearchBD-Live Bonusview & BD-LiveVirtual Package Play menu Play Mode menuPlaying files Media menuAdvanced playback controls Navigating the menus Settings MenusEntering the settings menu Unstable OSD menu or picture display?Audio Output resolution must be set to 1080p or Hdmi AutoDisplay LanguageNetwork Wired NetworkSystem Network TestPower switch again and then unload the disc TV does not support HdcpAudio Audio output formatEnglish Video Output Resolution 480i 576iCustomising CR104 Code LearningKey Mover Volume punch-throughCreating Macros To restore a moved Device Mode key to its original state Mode MoverLocking/Unlocking a specific Device Mode Copy a key between Device ModesMode key IR punch-through Resetting the CR104Commands DecimalLaser radiation SpecificationsRadio interference Continual improvement policySoftware licencing English Page Correct disposal of this product Product GuaranteeWarranty covers This marking indicates that this
Related manuals
Manual 148 pages 8.14 Kb