Arcam BDP100 manual Mode Mover, Locking/Unlocking a specific Device Mode

Page 28

Copy a key between Device Modes

It is possible to copy functions between Device Modes. However, remember that button functions are Device Mode specific and therefore effectively ‘punch-through’ to the original Device Mode when copied over.

The following example copies the AVR500/AVR600/ AV888 DiRECT function from the CR104 AMP device mode to the shifted function of the #button on AV Device Mode.

1.Press and hold Suntil the power LED blinks twice: **.

2.Press 994.

3.Press the Device Mode key of the function you want to move (e.g. A).

4.Press the function key you want to move (e.g.)/

DIRECT)

5.Press the key of the Device Mode you want to copy the function to (e.g. a)

6.Press the Sbutton graphic

7.Press the key you want to copy the function to (e.g. #)

If you prefer to copy the key to the main function of the

#button instead of the ‘shifted’ function, omit point 6 in the above example.

Mode Mover

If your home entertainment setup contains devices of the same type (e.g. two TVs, perhaps from different manufacturers) you can still control both those devices with the CR104. You simply need to reassign an unused Device Mode key.

NOTE

Before using Mode Mover, make sure both the source and destination Device Mode keys are unlocked (see next section).

Example: To use the zkey to control a second TV

1.Press and hold Suntil the power LED blinks

twice: **.

3.Press 992.

3.Press the Device Mode key for the type of device you want to control (e.g. for a TV, press a).

4.Press the Device Mode key you want to use (e.g. z).

5.Don’t forget to set up the CR104 to control the second device, using one of the methods from “Controlling other devices” on page E-15.

Note that volume punch-through is not applied to a Device Mode that has been copied using Mode Mover. However, volume punch-through functionality can be restored when you have used Mode Mover, by copying -, +and @from the AMP Device Mode to the same physical buttons on the new moved Device Mode using the last example shown in Key Mover.

To restore a moved Device Mode key to its original state

1.Press and hold Suntil the power LED blinks twice: **.

2.Press 992.

3.Press the Device Mode key you want to restore twice.

Locking/Unlocking a specific Device Mode

When you first unpack your CR104 and insert the batteries, for your convenience it is able to control certain Arcam components automatically (e.g. DVD players, Amplifiers, Tuners and CD Players). We achieve this by preprogramming specific Arcam device codes onto the relevant Device Mode keys, then locking

the Device Modes so you don’t reprogram them inadvertently.

If you want to override these locked default settings – to control a third-party CD player, for example – you will first need to unlock CD Mode before setting up the CR104 using one of the methods described at the start of this guide.

Here are the factory default settings:

Device Mode

Default status

Default Arcam

 

 

codes

bd

Locked

0762

SAT

Unlocked

1205

AV

Unlocked

0586

TUN

Locked

2009

AMP

Locked

1242

PVR

Unlocked

1930

VCR

Unlocked

0111

CD

Locked

2010

Alternative codes are available for multi-room solutions, or in the case of code clashes with other manufacturer’s products.

For example:

 

AMP (system code 19)

1954

You will need to change the system code on the product you wish to control, as well as the CR104.

NOTE

The AMP Device Mode can only be used to control Arcam amplifiers like the AVR500, AVR600 and AV888, either on its default or alternative IR system codes.

To toggle a Device Mode lock setting:

1.Press the Device Mode key you want to unlock (e.g. c)

2.Press and hold Suntil the power LED blinks twice: **.

3.Press 982.

<The power LED blinks twice when being locked, and blinks four times when being unlocked.

<If you enter an invalid key sequence, the power LED gives one long blink and returns to normal operation.

While the Device Mode key is locked, the Direct Code Setup and Move Mode functions are not available.

E-28

Image 28 Arcam BDP100 manual Mode Mover, Locking/Unlocking a specific Device Mode, Copy a key between Device Modes
Contents BDP100 HAn d b o o k Blu-ray Disc playerImportant safety instructions Safety GuidelinesSafety compliance Welcome ContentsEnglish Installation PowerRemote control and trigger inputs Placing the unitPower inlet Analogue audio output12V trigger input Coaxial digital outputMaking video connections Using two video connections simultaneouslyMaking audio connections Connecting using Hdmi Troubleshooting HdmiHdmi interface About HdmiDisc & file Formats Playable discsPlayable files Region codingNetwork connection USB connectionBasic Operation IntroductionTo skip chapters or tracks on a CD, press / or On the front panel or 4 on the handsetUsing the remote control BDP100 is supplied with the CR104 universal remote controlControlling the BDP100 Select the source key firstAdvanced controls Fast rewind Starts playbackPause playback. Press 4 to resume playback Displays Search menu with Time, Title Track optionsDevice Mode / Source keys Useful informationControlling other devices Code blink-backDisc Information Menus Soundtrack SelectionSubtitles SearchVirtual Package Bonusview & BD-LiveBD-Live Play Mode menu Playing filesPlay menu Media menuAdvanced playback controls Settings Menus Entering the settings menuNavigating the menus Unstable OSD menu or picture display?Output resolution must be set to 1080p or Hdmi Auto DisplayAudio LanguageWired Network SystemNetwork Network TestPower switch again and then unload the disc TV does not support HdcpAudio Audio output formatEnglish Video Output Resolution 480i 576iCustomising CR104 Code LearningCreating Macros Volume punch-throughKey Mover Mode Mover Locking/Unlocking a specific Device ModeTo restore a moved Device Mode key to its original state Copy a key between Device ModesMode key IR punch-through Resetting the CR104Commands DecimalSpecifications Radio interferenceLaser radiation Continual improvement policySoftware licencing English Page Product Guarantee Warranty coversCorrect disposal of this product This marking indicates that this
Related manuals
Manual 148 pages 8.14 Kb