Arcam BDP100 manual Mode key IR punch-through, Resetting the CR104

Page 29

Mode key IR punch-through

The Mode key IR punch-through default is ‘on’.

Example: To set the Mode key IR punch- through to AMP

1.Press and hold Suntil the power LED blinks twice: **.

2.Press 971. The power LED blinks twice:

* *.

3.Press Ato punch through IR from it.

Now, whenever you press and release a Mode key, the IR data assigned to AMP is transmitted, no matter what the current mode is (i.e. it ‘punches through’ any other device).

To cancel Mode key IR punch-through

1.Press and hold Suntil the power LED blinks twice: **.

2.Press 971. The power LED blinks twice:

**.

3.Press S until the power LED blinks twice: * *.

Resetting the CR104

Resetting the CR104 will erase all learned functions across all modes, as well as some other programmed functions like Macros. It will not reset the Device Mode keys; these will remain programmed to your choice of component.

1.Press and hold Suntil the power LED blinks twice: **.

2.Press 980. The power LED blinks four times: ****.

3.Press and hold Suntil the power LED blinks twice: **.

4.Press 993.

5.Press A. The power key LED blinks twice: * *.

6.Press and hold Suntil the power LED blinks twice: **.

7.Press 971. The power LED blinks twice:

**.

8.Press A. The power key LED blinks twice: * *.

Command summary

Direct code setup

(e.g. AV mode, Nnnn=code number)

aS**Nnnn **P

Library search

(e.g. AV mode)

aS991**P[until unit turns off

Sto save

Code blink back

aS990**

1count blinks for first N

2count blinks for second N

3count blinks for third N

4count blinks for fourth N

Code learning

(e.g. AV mode fast forward key)

S**975**a(*(many rapid blinks)

(Press key on original remote that you wish to copy)

**S**

Delete a learned function

(e.g. AV mode fast forward key)

S**975**a((**

Delete all learned functions with a device

(e.g. AV mode)

S**975aa

Creating macros

(e.g. SRCH key)

S**995haPwPzPS

**

Deassign macro

S**995hS**

Key mover

(e.g. SAT mode, DISP key to MENU key)

zS**994DU

Mode mover

(e.g. change SAT to TV(AV)) S**992az

Restore device mode

(e.g. restore SAT)

S**992zz

Locking/unlocking a mode

(e.g. CD mode)

cS**982** (i.e. two blinks for lock)

cS**982****

(i.e. four blinks for unlock)

Cancel all volume punch-through

S**993+****

Restore volume punch-through

S**993A**

Mode key IR punch-through

S**971**A

Cancel mode key IR punch-through

S**971**S**

NOTE

As elsewhere in this Handbook, a single ‘blink’ of the red LED behind the power button is indicated by the symbol *.

Device codes

The tables that begin on page 34 (in the final section of this Handbook) list the four-figure codes for different manufacturers’ devices.

Use these when setting your CR104 up to control your devices, as described in Method 1 (see page E-15).

If more than one code number is listed, try the first number. If the results are unsatisfactory, continue trying the numbers for that manufacturer to get the best ‘fit’ with the functionality required.

If the manufacturer of your equipment is not listed, you can try Method 2, the Library Search (see page E-15). This allows you to scan through every set of codes contained in the CR104’s memory.

English

E-29

Image 29 Arcam BDP100 manual Mode key IR punch-through, Resetting the CR104
Contents HAn d b o o k Blu-ray Disc player BDP100Safety compliance Safety GuidelinesImportant safety instructions English ContentsWelcome Power InstallationRemote control and trigger inputs Placing the unitAnalogue audio output Power inlet12V trigger input Coaxial digital outputMaking audio connections Using two video connections simultaneouslyMaking video connections Troubleshooting Hdmi Connecting using HdmiHdmi interface About HdmiPlayable discs Disc & file FormatsPlayable files Region codingUSB connection Network connectionIntroduction Basic OperationTo skip chapters or tracks on a CD, press / or On the front panel or 4 on the handsetBDP100 is supplied with the CR104 universal remote control Using the remote controlSelect the source key first Controlling the BDP100Fast rewind Starts playback Advanced controlsPause playback. Press 4 to resume playback Displays Search menu with Time, Title Track optionsUseful information Device Mode / Source keysCode blink-back Controlling other devicesSoundtrack Selection Disc Information MenusSubtitles SearchBD-Live Bonusview & BD-LiveVirtual Package Playing files Play Mode menuPlay menu Media menuAdvanced playback controls Entering the settings menu Settings MenusNavigating the menus Unstable OSD menu or picture display?Display Output resolution must be set to 1080p or Hdmi AutoAudio LanguageSystem Wired NetworkNetwork Network TestTV does not support Hdcp Power switch again and then unload the discAudio output format Audio480i 576i English Video Output ResolutionCode Learning Customising CR104Key Mover Volume punch-throughCreating Macros Locking/Unlocking a specific Device Mode Mode MoverTo restore a moved Device Mode key to its original state Copy a key between Device ModesResetting the CR104 Mode key IR punch-throughDecimal CommandsRadio interference SpecificationsLaser radiation Continual improvement policySoftware licencing English Page Warranty covers Product GuaranteeCorrect disposal of this product This marking indicates that this
Related manuals
Manual 148 pages 8.14 Kb