appendix
System Recovery
System Recovery CD allows you to easily recover the DVR system upon a system error.
Using the System Recovery CD
1.Turn the system on.
2.Insert the System Recovery CD in the CD drive.
3.Restart the system.
4.Press the F8 key during boot up.
5.Once booted from the CD, the following screen will be shown.
6.Select “2. Start Computer without UDMA Support”.
7.Select Restore Disk to recover the hard disk. (There is no password.)
8.Click on the OK button to start the recovery process.
9.Once the recovery process has completed, a warning tone (beep) will sound.
10.Click on the Reboot button.
11.After restarting, the system will automatically commence backing up the operating system.
12.Following operating system backup, the system will automatically restart.
13.Windows will load and launch the DVR software.
The recovery CD can be used to recover the system when replacing the
If recovering the system from the hard disk, it will be possible to maintain and access recorded data intact. Data damage due to physical error of the hard disk or a user error, however, can lead to permanent loss of existing recorded data.
09 appendix
appendix _65