External Keypad
Menu for setting up a keypad device to remotely control the DVR.
1
2
3
1 | DVR ID |
| mode: Identify the interface method (RS232, |
| |||
| Enter the DVR's ID (1 through 255) so that the |
| RS422, or RS485) of the port through which |
| keypad device may identify the DVR. |
| the keypad device connects to the DVR. |
2 | Keypad ID |
| Parity: Select the bit type (None, Odd, Even, Display, |
| Blank) for detecting data transmission errors. | ||
| Enter the keypad's ID (1 through 4) so that the |
| Data Bits: Select from 4, 5, 6, 7, and 8. |
| DVR may identify the keypad. |
| Stop Bits: Select from 1, 1.5, and 2. |
3 | Keypad Setup |
| Default: Reset all settings to default. |
|
| ||
| Keypad Name: Assign name to the keypad. |
| When using a keypad device, please ensure |
| Use: Enable or disable keypad use. |
| that communication settings for both the |
| Keypad model: Select the model of the keypad |
| DVR and the keypad device are the same. |
| device you wish to use. |
| |
|
| Communication setting mismatch can | |
| Speed: Select a baudrate (2400Bps - 115200Bps) |
| |
|
| prevent the keypad device and the DVR | |
| for communication between the keypad |
| |
|
| from communicating. | |
| device and the DVR. |
| |
| Address: Select the keypad device’s address (0 |
| Refer to the keypad manufacturer’s |
| through 32). |
| product manual for further information on |
| Port: Identify the number of the port through which |
| the keypad device. |
| the keypad device connects to the DVR. |
|
|
|
|
|
|
05 SYSTEM SETUp
System Setup _27