Valet Mode (System in Disarm or Valet Mode)
The valet switch allows you to temporarily bypass all alarm functions eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in Valet Mode, all alarm functions and remote start functions are bypassed. However, the remote panic feature and remote door locks remain operational. To use the Valet Mode, the system must first be disarmed either by using your remote transmitter, or by operating the manual override sequence.
Enter Valet Mode | Remote Door Lock | Remote Door Unlock |
1. In the Disarmed Mode, turn the ignition to “ON” |
|
|
position. |
|
|
2. Push and hold the valet switch for 2 seconds |
|
|
until the LED turns on solid. The LED will remain |
|
|
on solid as long as the unit is in the Valet Mode. |
|
|
Exit Valet Mode
1.To return to normal operation, turn “ON” ignition.
2.Push and hold valet switch for 2 seconds. The LED will turn off, indicating the system has now exited the Valet Mode.
Car Locator
While in the Armed Mode, press the 
button to activate car locator function. The siren/horn will chirp 6 times and the parking lights will flash 12 times to help you locate your car.
Panic Function
The transmitter can be used as a remote panic switch to manually trigger the alarm system in case of an emergency.
1.Press and hold the 
button for 3 seconds to enter the Panic Mode (horn/siren will start to sound and parking lights will flash).
2.While in Panic Mode the transmitter 
and 
buttons can be used to lock and unlock the door (if that option is installed). However, if the 
button is pressed, the vehicle’s starter disable device (when installed) will be disabled, allowing the vehicle to start.
3.To turn off the panic function, press and hold the 
or 
button again for 3 seconds.
Note: If any transmitter buttons other than 
or 
button is pressed the panic function will be turned off.
4.If the panic function is not turned off by the transmitter, it will turn off and reset itself after 30 seconds.
10