Carbine PLUS 6850 manual Turbo Timer Mode, To Activate, Exit Timer Start

Page 14

Turbo Timer Mode

After arriving at your destination, Turbo Timer keeps the engine running for a programmable time period of 1, 3 or 5 minutes. This allows the engine’s turbo charger time to conveniently cool down after you have left the vehicle.

To Activate:

1.While the engine is running, set the emergency brake and place the transmission into "Park".

2.Before turning off the engine, press and release and buttons at the same time. The parking lights will flash indicating the remote start has entered Turbo Timer Mode.

3.Remove the ignition key and the engine will keep running.

4.Exit and secure the vehicle. The engine continues running until the pre-programmed time has elapsed.

Timer Start

Important! Timer Start should be used only in open areas. Never start or leave a vehicle running in an enclosed area such as a garage or carport.

This unit can be programmed to auto-start and run the engine every 2 or 3 hours (3 hours is the default setting). The engine will run for the programmed run time and then shut down. This feature is designed to prevent the engine from freezing in cold climates.

A Maximum of Six Auto-Start Cycles can Occur.

Enter Timer Start:

1.Press the button twice to remote start the vehicle.

2.As soon as the parking lights have turned on or are flashing, press the button once. Then

press and hold the

button. The parking light will flash 3 times, the siren or horn will chirp 3

times and the

icon will appear on the LCD display. The vehicle is now

programmed to start every 3 hours.

3. Press the brake pedal to shut off the engine.

Exit Timer Start:

1. Make sure the remote start system is not operating the engine.

2. Turn the ignition “ON”. The LED and parking lights will flash 4 times. The horn chirps 4 times. The vehicle is no longer programmed to Timer Start automatically.

Or

1.Press thebutton twice to remote start the vehicle.

2.As soon as the parking lights have turned on or flashing, press the button once. Then press and hold the button. The parking lights will flash 4 times. The siren or horn chirps 4 times. The vehicle is no longer programmed to Timer Start automatically.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User’s Manual Contents Remote Control Transmitters LCD Remote IconsTwo Steps Door Unlock LCD Remote Control Transmitter OperationSystem Function Remark PressProgramming the LCD Transmitter Interference Battery ReplacementLED Indicator System FunctionParking Lights Chirp IndicatorsSystem Characteristics Manual Arming Lock & Arm Automatic ArmingManual Disarming Unlock & Disarm Disarming without a TransmitterPanic Function Exit Valet ModeCar Locator PositionActive Anti-Car Jacking Trigger the Anti-Car Jacking ModeAnti-Car Jacking Passive Anti-Car JackingDome Light Supervision Timer Control Output ChannelPower-On Memory Ignition Controlled Door LocksPress the button twice on the transmitter Temporary Stop FeatureRemote Start Your Vehicle Using the Remote Transmitter Engine will start in approximately 5 secondsExit Timer Start Turbo Timer ModeTimer Start To ActivateShut Down Input for Remote Starter Disabling The Remote Start System If InstalledTurn Off Remote Start Return to First Car Operation For LCD Remote Control TransmitterSecond Carbine Security System Operation Replacement Parts and Accessories BatteriesParts and Accessories Order Form Credit Card or Money Order OnlyLimited Lifetime Warranty Copyright 2006 Magnadyne Corporation
Top Page Image Contents