Second Carbine Security System Operation
If your transmitters have been programmed to a second Carbine security system, follow the steps below.
For LCD Remote Control Transmitter:
Second Vehicle Operation: While the 
icon is displayed on the LCD screen, you can remote control and communicate with a second vehicle security system.
1. Press and hold 
and 
buttons at the same time until one long beep is heard. Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the Programming Mode has been exited.
2.Within 5 seconds, press and hold the 
button until two beeping sounds are
heard and the 
icon is displayed on the LCD screen indicating second car operation.
3.While the 
is displayed, press any button on the transmitter to control the second vehicle’s security system or alarm function (arm/disarm/trunk/remote start).
Note: Button functions are the same for the second car as they are for the first car.
Return to First Car Operation
1. Press and hold 
and 
buttons at the same time until one long beep is heard. Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the Programming Mode has been exited.
2. Within 5 seconds, press and hold the 
button until one beeping sounds are
heard and the 
icon is not displayed on the LCD screen indicating first car operation.
16