Anti-Car Jacking
Warning: This security system has a car jacking feature. Its default setting is “OFF”. So be sure to enable this feature if you feel it is needed.
Active Anti-Car Jacking
1.Press and hold the transmitter and buttons at the same time for 2 seconds while the vehicle’s ignition is “ON”. The parking lights will turn on for 1.5 seconds to indicate the system has entered the
2.Once the system is armed in the
Passive Anti-Car Jacking
1.Turn the ignition switch to the “ON” position, and the system will enter the
2.Once the system is armed in the
Trigger the Anti-Car Jacking Mode
A. 50 seconds after the system has been triggered. The siren will start chirping for 15 seconds.
B. During this 15 second period of chirping, you can push the valet switch once to turn off the car jacking feature.
C. 65 seconds after the system has been triggered. The siren starts sounding and the parking lights start flashing.
D. 90 seconds after the system has been triggered:
1.The siren will still be sounding and the parking lights flashing.
2.The starter disable will activate to prevent the vehicle from starting.
3.
Override the System to Turn Off Anti-Car Jacking
Turn the ignition switch from OFF to ON, and within 10 seconds push the valet switch. The siren will stop sounding and the security system is now disarmed.
Note: If you use password pin code to double protect the vehicle, you will need to use it to completely disarm the system.
11