Samsung SP-L300 manual Insert the power plug firmly so that it does not come loose

Page 2

To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly.

Failure to follow the instructions marked with this symbol may cause personal injury or even fatality.

Failure to follow the instructions marked with this symbol may cause personal injury or damage to the product or property.

Power Related Installation Related Cleaning and Use Related

[The images here are for reference only, and are not applicable in all cases (or countries).]

Insert the power plug firmly so that it does not come loose.

zWhen the connection is not firm, it may cause a fire.

Do not use loose power outlets or damaged power cables.

zThere is a danger of electric shock or fire.

Under no circumstances touch the power plug with wet hands.

zThere is a danger of electric shock.

Do not plug multiple devices into a single wall outlet.

zThere is a danger of fire.

Do not bend the power cord excessively or place heavy objects on it.

zThere is a danger of electric shock or fire.

Before moving the product, make sure the power is off and remove the power cord from the wall outlet. In addition, make sure all connection cables are disconnected from other devices before moving it.

zMoving the product without disconnecting the power cord may damage the power cord and cause electric shock or fire.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

zThere is a danger of electric shock or fire.

Image 2
Contents Page Insert the power plug firmly so that it does not come loose Keep the power cord away from heaters Place the product on the ground carefully There is a danger of fire or explosion Correct disposal of batteries in this product Europe only An optical engine adopting new LCD technology Front/Upper SideLens cover UnpackingInformation Clearing Indicator ProblemsLED Indications ClassificationStateCenter Rear SideMove PowerMenu Exit MuteReturn VOLResolution Supported Display Modes PC Timing D-Sub/HDMIMHz AV Timing D-SubFormat AV Timing VIDEO/S-VIDEOPage Installing the Projector Zoom and Focus AdjustmentVertical Leveling with Adjustable FeetScreen Size and Projection Distance YmmScreen Rear of Projector Connecting a PC using a D-Sub cable Connecting a PC using a HDMI/DVI cableConnecting an External Monitor Connecting an HDMI-Compatible DeviceConnecting an AV device using a D-Sub cable Connecting a component output AV deviceConnecting using a Video/S-Video cable Connecting an External Speaker Turning on the projector Selecting an input sourcePlay/Stop Screen DescriptionPlay/Stop AdjustmentDescription Normal Color Temperature Offset GainFor the RGB signal of Hdmi mode Zoom1Install Maximum and then perform Fine Adjustment againDefault settings Fine Used to fine tune the PC screenUsage Logo Blue BlackAuto Rgbpc Rgbav YPbPrAV Screen Adjustment Off 10 min 20 min 30 min Screen and External Source Installation and ConnectionMenu and Remote Control Page Lamp Replacement To clean the exterior and lens of the projectorTo clean the interior of the projector Lamp Replacement Procedure Replacing and Cleaning the FilterLatin America Ventilating openingsNorth America Europe Asia PacificMiddle East & Africa