Samsung SP-L300 manual There is a danger of fire or explosion

Page 5

zThere is a danger of fire or explosion.

Do not place containers with water, vases, drinks, chemicals, small metal parts or heavy objects on the product.

zIf water enters the product, it may cause electric shock, or fire and when heavy objects fall, they may cause injury.

Do not let children place objects such as toys or cookies on the product.

zIf a child tries to reach for any of these objects, the product may fall and cause harm.

Do not look directly at the light of the lamp nor project the picture onto eyes.

zThis is dangerous especially for children.

When you remove batteries from the remote, be careful that they are not swallowed by children. Keep batteries out of the reach of children.

zIf swallowed, see a doctor immediately.

If the product emits smoke, unusual noise, or there is a burning smell,disconnect the power plug immediately, and contact a Service Center.

zThere is a danger of electric shock or fire.

If the power plug pin or jack is exposed to dust, water or alien substances, clean it thoroughly.

zThere is a danger of electric shock or fire.

When cleaning the product, disconnect the power cord and wipe the product using a soft dry cloth.

zDo not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent.

When not using the product for an extended period of time, disconnect the power plug.

zOtherwise, this may cause heat emission from the accumulated dirt or degraded insulation, leading to electric shock or fire.

Do not install the product in places with heavy dust, chemical substances, high or low temperatures, high humidity, or where it will be operated for a long period continuously etc.

Image 5
Contents Page Insert the power plug firmly so that it does not come loose Keep the power cord away from heaters Place the product on the ground carefully There is a danger of fire or explosion Correct disposal of batteries in this product Europe only Front/Upper Side An optical engine adopting new LCD technologyUnpacking Lens coverLED Indications Clearing Indicator ProblemsInformation ClassificationStateRear Side CenterMove PowerMenu Return MuteExit VOLSupported Display Modes PC Timing D-Sub/HDMI ResolutionFormat AV Timing D-SubMHz AV Timing VIDEO/S-VIDEOPage Zoom and Focus Adjustment Installing the ProjectorScreen Size and Projection Distance Leveling with Adjustable FeetVertical YmmScreen Rear of Projector Connecting a PC using a HDMI/DVI cable Connecting a PC using a D-Sub cableConnecting an HDMI-Compatible Device Connecting an External MonitorConnecting a component output AV device Connecting an AV device using a D-Sub cableConnecting using a Video/S-Video cable Connecting an External Speaker Selecting an input source Turning on the projectorPlay/Stop Screen DescriptionPlay/Stop AdjustmentDescription For the RGB signal of Hdmi mode Color Temperature Offset GainNormal Zoom1Default settings Maximum and then perform Fine Adjustment againInstall Fine Used to fine tune the PC screenUsage Logo Blue BlackAuto Rgbpc Rgbav YPbPrAV Screen Adjustment Off 10 min 20 min 30 min Screen and External Source Installation and ConnectionMenu and Remote Control Page Lamp Replacement To clean the exterior and lens of the projectorTo clean the interior of the projector Replacing and Cleaning the Filter Lamp Replacement ProcedureLatin America Ventilating openingsNorth America Asia Pacific EuropeMiddle East & Africa