Samsung SP-L300 manual Color Temperature Offset Gain, Normal, Zoom1, Zoom2, 169

▶Presentation and Text modes are only enabled if the input signal is a PC Timing(D- Sub/HDMI)signal.

2)Contrast : Used to adjust the contrast between the object and the background.

3)Brightness : Used to adjust brightness of the entire picture.

4)Sharpness : Used to adjust the sharpness of the picture.

▶When the input signal is PC Timing(D-Sub/HDMI), the Sharpness cannot

be adjusted.

5)Color : Used to adjust color lighter or darker.

▶When the input signal is PC Timing(D-Sub/HDMI), the Color cannot be adjusted.

6)Tint : Used to obtain more natural color of objects using Green or Red enhancement.

▶When the input signal is PC Timing(D-Sub/HDMI)and PAL and SECAM of the [S-Video] and [AV] modes, the color cannot be adjusted.

7)Color Temperature : You can select the color temperature according to your preferences.

-Factory defaults: 5500K, 6500K, 8000K, 9300K

-You can select the color temperature for the items below according to your preferences.

R-Gain, G-Gain, B-Gain : Adjusts the color temperature of the White level.

R-Offset, G-Offset, B-Offset : Adjusts the color temperature of the Black level.

1)	Color Temperature	5)	R-Offset
2)	R-Gain	6)	G-Offset
3)	G-Gain	7)	B-Offset

4)B-Gain

8)Gamma : Changes the brightness characteristic for each color tone of an image.

-The larger (+) the value, the greater the contrast of the bright and dark parts; the smaller (-) the value, the darker the dark parts.

-Adjustable range: -3 to +3

9)Save :You can save the status of a screen you adjusted according to your preferences using the Mode > User OSD.

10)Reset : Restores the mode settings to the factory defaults.

Size	You can select a screen size according to the type of scene.
	▶ When the input signal is PC Timing(D-Sub/HDMI), Zoom1/Zoom2 is not supported.
	1)	Normal
	2)	Zoom1
	3)	Zoom2
	4)	16:9
Position	Adjust the screen position if it is not aligned.
Digital NR	When a dotted line is displayed or the screen shakes, you can view a better visual
	quality picture by enabling Noise Reduction.
	▶ When the input signal is PC Timing(D-Sub/HDMI)), Digital NR does not operate.

Black Level You can select the signal black level according to the input signal. If it is unsuitable for the input signal, the dark parts may not be shown clearly or may be shown dimly.

▶The Black Level can only be set for [AV],[S-Video], the 480i and 576i signals of AV Timing(D-Sub), and the RGB signal of the [HDMI] mode.

-For [AV],[S-Video] and the 480i and 576i signals of AV Timing(D-Sub).

1)0 IRE : Sets the black level to 0 IRE

2)7.5 IRE : Sets the black level to 7.5 IRE

Contrast

Brightness

Sharpness

Color

Tint

Color

Temperature

R-Gain

G-Gain

B-Gain

R-Offset

G-Offset

B-Offset

Gamma

Save

Reset

-For the RGB signal of [HDMI] mode