Hitachi CP-S833W, CP-S833E specifications How to insert batteries, Replace the cover

Page 10

Names and functions of each part (continued)

How to insert batteries

Insert the provided batteries (LR6 (alkal) into the remote control transmitter.

1

Remove the battery compartment cover.

2

Insert the batteries as illustrated inside

the battery compartment.

Slide the battery compartment cover in the direction of the arrow while pressing slightly down on it.

Caution Cautions on use of batteries

∙Do not use batteries not specified for this unit. Also do not use old and new batteries together. It may cause a fire, injury due to burst of battery or liquid leakage.

∙When inserting batteries, pay attention to the direction of the and polarity indications and insert the batteries correctly. If the polarities are confused, it may cause injury or damage near the unit due to a burst of battery or liquid leakage.

3Replace the cover.

Caution Cautions on use

∙Do not drop the remote control transmitter or apply any shock to it.

∙Do not let the remote control transmitter get wet and do not put it on a wet object. It may cause a malfunction.

∙If you are not going to use it for a long time, remove the batteries from the remote control transmitter.

∙If operation of the remote control becomes difficult, replace the batteries.

Caution Cautions on use of the laser pointer.

∙The laser pointer on the remote control unit radiates the laser beam from the laser aperture.

∙This laser pointer used as a stick (for indication).

∙Do not stare directly into the laser aperture or radiate the laser beam to other persons as the laser emitted is a class II laser and it could damage you vision , etc.

∙Especially pay attention if children are present.

∙ The three labels below are caution labels for the laser beam.

 

 

 

 

 

RADIAZIONI LASER

 

 

 

 

 

CAUTION

 

 

 

 

 

 

 

APPARECCHIO LASER DI CLASS 2

 

 

 

 

 

 

NON GUARDARE NEL RAGGIO LUCE

 

 

 

 

LASER RADIATION -

 

RAYONNEMENT LASER

MANUFACTURED

 

 

 

 

DO NOT STARE INTO BEAM

 

NE PAS REGARDER DANS

 

 

 

 

 

 

LE FAISCEAU APPAREIL

Jun-99

 

 

 

 

WAVE LEGTH : 670nm

 

 

 

 

 

 

A LASER DE CLASSE 2

 

 

 

 

 

MAX. OUTPUT : 1mW

 

 

 

 

 

 

 

LASER-STRAHLUNG

PLACE OF

 

 

 

 

 

 

 

 

 

CLASS Ⅱ LASER PRODUCT

 

NICHT IN DEN STRAHL

 

 

 

 

 

BLICKEN LASAER KLASSE 2

MANUFACTURER:D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AVOIDE EXPOSURE-LASER

RADIATION IS EMITTED

FROM THIS APERTURE

LASER APERTURE

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Outline FeaturesContents Operating GuideFor the Customers in U.K Before use Video signal cablesPower cord Instructions to UsersDo not use power supplies other Than that specified Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place If any abnormality occursHandle the power cord carefully Be careful in handling the power cordCleaning Do not step on this unit or do not put a Heavy object on itDo not place this unit where it gets hot When you are not going to use For a long timeClean inside the unit at least once two years VolumeNames and functions of each part Main unitRGB output terminal AC in socket Main Power switchRemote control sensor RGB input terminal Video input terminalRemote control transmitter How to insert batteries Replace the coverHow to use foot adjusters InstallationExample of the projector and screen installation View from the topBasic operations To project the pictureTo turn off the power PLUG&PLAYFreeze Function Magnifying FunctionTo return to the initial setting Adjustments and functionsMemory function SET UP Adjustment Item Details of adjustmentInput ImageOPT Connection to the video signal terminals Connection to the RGB signal terminalExample of computer signal Resolution Standard Display Dots KHz TypeComputer/signal Horizontal Timing µs Initial set signalsComputer/signal Vertical Timing lines Serial Control signal terminalPin No RS-232C Mouse PS/2 +5VADB Mac mouse PS/2 mouseSerial mouse Control command table Control command tableCommunication Control data table Procedure of default setting the Projector status Procedure of getting the Projector statusProcedure of setting the Projector status Example of command errorAC Inlet Example of system setupConnecting various equipment VTR, etc Video model onlyCleaning the air filter Install the air filterRemove the lamp cover How to replace lampLoosen two screws and pull Handle to remove Lamp.Screw Message table Reset the lamp timeLamp On-screen displayWhen you think something wrong RCA Jack terminal Terminal Dimension diagramRCA Jack terminal Input terminal Input/Output Operating guide RGB cable

CP-S833W, CP-S833E specifications

The Hitachi CP-S833E and CP-S833W projectors stand out in the market for their balance of quality, performance, and versatility, making them ideal for both business presentations and educational environments. These projectors are designed to provide vibrant visuals, ensuring that audiences remain engaged and informed.

One of the main features of the CP-S833E and CP-S833W is their high brightness level, rated at around 3,000 ANSI lumens. This impressive brightness ensures that images are clear and visible even in well-lit rooms. Coupled with a high contrast ratio, these projectors deliver sharp images with deep blacks and vibrant colors, enhancing the overall viewing experience.

Both models utilize 3LCD technology, which helps in producing accurate color reproduction while minimizing the risks of color breakdown often associated with other projection technologies. The 3LCD system effectively uses three chips to project red, green, and blue light, resulting in richer and more natural images.

The Hitachi CP-S833E and CP-S833W are equipped with a native XGA resolution of 1024 x 768 pixels. This resolution strikes a good balance between image quality and performance, making it suitable for various content types, whether it be text-heavy slides, videos, or images. Furthermore, the projectors support various input options, including HDMI, VGA, and composite video, allowing for easy connectivity with a wide range of devices.

Additionally, these projectors come with features such as keystone correction and a built-in speaker, which enhance flexibility and functionality. Keystone correction allows users to adjust the projected image, ensuring it maintains a proper rectangular shape even when the projector is not perfectly aligned with the screen. The built-in speaker makes it convenient for users to present without needing additional audio equipment.

In terms of energy efficiency, both models are designed to consume less power. They feature a long lamp life, extending up to 5,000 hours in eco mode, which reduces replacement costs and contributes to lower overall operating expenses.

Overall, the Hitachi CP-S833E and CP-S833W projectors combine advanced technology with user-friendly features, making them a reliable choice for any presentation setting. Their impressive brightness, color accuracy, and versatile connectivity options ensure that they can meet the diverse needs of users, whether in classrooms or boardrooms.
Top Page Image Contents