Hitachi CP-S833W If any abnormality occurs, Do not look directly at the lens when Lamp is lit

Page 4
Pull out the power plug from the power outlet.

[Safety precaution]

Warning

If any abnormality occurs.

∙ When there is an abnormal smell or smoke, if

you use this unit as it is, this could cause a fire

or electric shock, etc. When an abnormality is

found, immediately turn off the power switch

and pull out the power plug from the power

outlet. Check that there is no smoke, etc., then

contact your dealer to repair the unit. Do not

Do not look directly at the lens when

the lamp is lit.

Do not look directly at the lens when the lamp is lit. Since a strong light

is used, it could damage you vision, etc. Especially pay attention if children are present.

Do not insert any foreign object.

repair it yourself as it is very dangerous.

∙ Do not use this unit as it is after

trouble has occurred,

such as "No picture", "No sound", "Abnormal

sound", etc. This may cause a fire, electric shock, etc. In this case immediately turn off the power switch and disconnect the power

plug, then contact your dealer to repair the unit.

Do not insert a metal or flammable object inside through the ventilation holes, etc. This may cause a fire, electric shock, etc.

If foreign matter enters inside, turn the power switch off and disconnect the power plug from the power outlet and contact your dealer. If you use as it is, it may cause a fire, electric shock, etc. Be careful especially if children could touch the unit.

Pull out the power plug from the power outlet.

If water, etc. enters inside the unit, turn off the power switch of the unit first and disconnect the power plug and then contact your dealer. If you use it as it is, it may cause a fire, electric shock, etc.

Do not install this unit in an unstable place.

Avoid placing it in an unstable place

Do not apply any shock.

If you drop this unit or if the cabinet is broken, turn off the power switch, disconnect the power plug and contact your dealer. If you use it as it is, it may cause a fire, electric shock, etc.

Pull out the power plug from the power outlet.

such as weak base, inclined floor, etc. This may cause it to drop or fall over, resulting in injury.

Do not open the cabinet.

Do not remodel this unit.

Do not remodel this unit. It may cause a fire, electric shock, etc.

Prohibition of disassembly

Do not open the cabinet.

 

 

There are high voltage

 

 

parts inside the cabinet

 

 

and this may cause an

Electric shock

Prohibition

electric shock. Ask your

hazard

of

 

 

disassembly

dealer to check inside and adjust and repair the unit.

Do not put a container, etc. with

liquid on this unit.

Do not put a vase, flowerpot, cosmetic container, medicine or

water and small metal objects on this unit. If liquid spills and enter inside the unit, it may cause a fire, electric shock, etc.

Do not use this in a bathroom, etc.

Do not use this unit in a bathroom,

etc. This may cause a fire, electric

shock, etc.

Do not use near water

4

Do not use power supplies other

than that specified.

Do not use this unit with a power voltage other than specified power

supply voltage. It may cause a fire, electric shock, etc.

Image 4
Contents Features ContentsOutline Operating GuideFor the Customers in U.K Video signal cables Power cordBefore use Instructions to UsersDo not look directly at the lens when Lamp is lit Do not install this unit in an unstable placeDo not use power supplies other Than that specified If any abnormality occursBe careful in handling the power cord CleaningHandle the power cord carefully Do not step on this unit or do not put a Heavy object on itWhen you are not going to use For a long time Clean inside the unit at least once two yearsDo not place this unit where it gets hot VolumeNames and functions of each part Main unitAC in socket Main Power switch Remote control sensor RGB input terminalRGB output terminal Video input terminalRemote control transmitter How to insert batteries Replace the coverInstallation Example of the projector and screen installationHow to use foot adjusters View from the topBasic operations To project the pictureTo turn off the power PLUG&PLAYFreeze Function Magnifying FunctionTo return to the initial setting Adjustments and functionsMemory function SET UP Adjustment Item Details of adjustmentInput ImageOPT Connection to the video signal terminals Connection to the RGB signal terminalExample of computer signal Resolution Standard Display Dots KHz TypeComputer/signal Horizontal Timing µs Initial set signalsComputer/signal Vertical Timing lines Control signal terminal Pin No RS-232C Mouse PS/2Serial +5VADB Mac mouse PS/2 mouseSerial mouse Control command table Control command tableCommunication Control data table Procedure of getting the Projector status Procedure of setting the Projector statusProcedure of default setting the Projector status Example of command errorExample of system setup Connecting various equipmentAC Inlet VTR, etc Video model onlyCleaning the air filter Install the air filterRemove the lamp cover How to replace lampLoosen two screws and pull Handle to remove Lamp.Screw Reset the lamp time LampMessage table On-screen displayWhen you think something wrong Dimension diagram RCA Jack terminal Input terminal Input/OutputRCA Jack terminal Terminal Operating guide RGB cable

CP-S833W, CP-S833E specifications

The Hitachi CP-S833E and CP-S833W projectors stand out in the market for their balance of quality, performance, and versatility, making them ideal for both business presentations and educational environments. These projectors are designed to provide vibrant visuals, ensuring that audiences remain engaged and informed.

One of the main features of the CP-S833E and CP-S833W is their high brightness level, rated at around 3,000 ANSI lumens. This impressive brightness ensures that images are clear and visible even in well-lit rooms. Coupled with a high contrast ratio, these projectors deliver sharp images with deep blacks and vibrant colors, enhancing the overall viewing experience.

Both models utilize 3LCD technology, which helps in producing accurate color reproduction while minimizing the risks of color breakdown often associated with other projection technologies. The 3LCD system effectively uses three chips to project red, green, and blue light, resulting in richer and more natural images.

The Hitachi CP-S833E and CP-S833W are equipped with a native XGA resolution of 1024 x 768 pixels. This resolution strikes a good balance between image quality and performance, making it suitable for various content types, whether it be text-heavy slides, videos, or images. Furthermore, the projectors support various input options, including HDMI, VGA, and composite video, allowing for easy connectivity with a wide range of devices.

Additionally, these projectors come with features such as keystone correction and a built-in speaker, which enhance flexibility and functionality. Keystone correction allows users to adjust the projected image, ensuring it maintains a proper rectangular shape even when the projector is not perfectly aligned with the screen. The built-in speaker makes it convenient for users to present without needing additional audio equipment.

In terms of energy efficiency, both models are designed to consume less power. They feature a long lamp life, extending up to 5,000 hours in eco mode, which reduces replacement costs and contributes to lower overall operating expenses.

Overall, the Hitachi CP-S833E and CP-S833W projectors combine advanced technology with user-friendly features, making them a reliable choice for any presentation setting. Their impressive brightness, color accuracy, and versatile connectivity options ensure that they can meet the diverse needs of users, whether in classrooms or boardrooms.