Hitachi CP-S833W, CP-S833E specifications Freeze Function, Magnifying Function

Page 14

Basic operations (continued)

FREEZE FUNCTION

This function can display a still picture (by freezing). This function can

 

STANDBY/ON MUTE

 

 

 

be used in combination with a MAGNIFY function.

 

FREEZE

 

 

 

 

1

Press the FREEZE button.

1, 2

OFF

 

 

 

 

 

MAGNIFY VOLUME

The display image stops. A

 

 

 

mark appears at the lower right of

 

POSITION ONLASER

 

 

 

the screen for about 3 seconds during the FREEZE function.

[TO RELEASE FREEZE]

2

Press the FREEZE button.

The freeze function is cancelled. Furthermore, a mark appears at the bottom of the screen for 3

seconds or so when FREEZE is released.

Caution ∙ Note: When the FREEZE Button is pressed, FREEZE and RELEASE can function alternately.

∙What is more, FREEZE is released when an input selector button is pressed or when the display mode of a personal computer is switched over during display.

∙The POSITION ON icon is not displayed during freeze. Also, scrolling using DISK PAD operation is not possible.

∙When a still picture signal is given as input and the freeze function is ON, do not forget to cancel the freeze function.

MAGNIFYING FUNCTION

It is possible to display a partially magnified picture. This function can be used in combination with a FREEZE function.

1

Press the MAGNIFY + button.

∙ By doing so, the center of the picture can be magnified as one

 

part, becoming double in size.

[TO CHANGE MAGNIFICATION]

 

 

2

Press the MAGNIFY + button.

∙ When the button is pressed, more magnification of display

 

takes place. (Maximum about 4 times)

 

 

3

Press the MAGNIFY - button.

∙ When the button is pressed, the magnified display reduces its

size. (Minimum about 1.1 times)

1, 2 6

4

5

STANDBY/ON MUTE

FREEZE

MAGNIFY VOLUME

OFF

POSITION ON

LASER

3

RESETRIGHT

MENU ON MOUSE ON

BLANK TIMER

 

[TO SHIFT DISPLAY AREA]

RGBVIDEO

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

 

 

 

4

Press the POSITION ON button.

 

 

 

 

 

5

Press the DISK PAD button up and down and left and right.

∙ The magnified display area shifts in the direction the button is pressed.

 

 

 

 

 

 

[TO RETURN TO NORMAL DISPLAY]

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Press MAGNIFY OFF button.

 

 

 

 

 

 

Caution

Note: The MAGNIFY function is released when an input selector button is pressed or when the

 

display mode of a personal computer is switched over during display.

14

 

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Outline FeaturesContents Operating GuideFor the Customers in U.K Before use Video signal cablesPower cord Instructions to UsersDo not use power supplies other Than that specified Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place If any abnormality occursHandle the power cord carefully Be careful in handling the power cordCleaning Do not step on this unit or do not put a Heavy object on itDo not place this unit where it gets hot When you are not going to use For a long timeClean inside the unit at least once two years VolumeNames and functions of each part Main unitRGB output terminal AC in socket Main Power switchRemote control sensor RGB input terminal Video input terminalRemote control transmitter How to insert batteries Replace the coverHow to use foot adjusters InstallationExample of the projector and screen installation View from the topBasic operations To project the pictureTo turn off the power PLUG&PLAYFreeze Function Magnifying FunctionMemory function Adjustments and functionsTo return to the initial setting SET UP Adjustment Item Details of adjustmentInput ImageOPT Connection to the video signal terminals Connection to the RGB signal terminalExample of computer signal Resolution Standard Display Dots KHz TypeComputer/signal Vertical Timing lines Initial set signalsComputer/signal Horizontal Timing µs Serial Control signal terminalPin No RS-232C Mouse PS/2 +5VSerial mouse PS/2 mouseADB Mac mouse Communication Control command tableControl command table Control data table Procedure of default setting the Projector status Procedure of getting the Projector statusProcedure of setting the Projector status Example of command errorAC Inlet Example of system setupConnecting various equipment VTR, etc Video model onlyCleaning the air filter Install the air filterLoosen two screws and pull Handle to remove Lamp.Screw How to replace lampRemove the lamp cover Message table Reset the lamp timeLamp On-screen displayWhen you think something wrong RCA Jack terminal Terminal Dimension diagramRCA Jack terminal Input terminal Input/Output Operating guide RGB cable

CP-S833W, CP-S833E specifications

The Hitachi CP-S833E and CP-S833W projectors stand out in the market for their balance of quality, performance, and versatility, making them ideal for both business presentations and educational environments. These projectors are designed to provide vibrant visuals, ensuring that audiences remain engaged and informed.

One of the main features of the CP-S833E and CP-S833W is their high brightness level, rated at around 3,000 ANSI lumens. This impressive brightness ensures that images are clear and visible even in well-lit rooms. Coupled with a high contrast ratio, these projectors deliver sharp images with deep blacks and vibrant colors, enhancing the overall viewing experience.

Both models utilize 3LCD technology, which helps in producing accurate color reproduction while minimizing the risks of color breakdown often associated with other projection technologies. The 3LCD system effectively uses three chips to project red, green, and blue light, resulting in richer and more natural images.

The Hitachi CP-S833E and CP-S833W are equipped with a native XGA resolution of 1024 x 768 pixels. This resolution strikes a good balance between image quality and performance, making it suitable for various content types, whether it be text-heavy slides, videos, or images. Furthermore, the projectors support various input options, including HDMI, VGA, and composite video, allowing for easy connectivity with a wide range of devices.

Additionally, these projectors come with features such as keystone correction and a built-in speaker, which enhance flexibility and functionality. Keystone correction allows users to adjust the projected image, ensuring it maintains a proper rectangular shape even when the projector is not perfectly aligned with the screen. The built-in speaker makes it convenient for users to present without needing additional audio equipment.

In terms of energy efficiency, both models are designed to consume less power. They feature a long lamp life, extending up to 5,000 hours in eco mode, which reduces replacement costs and contributes to lower overall operating expenses.

Overall, the Hitachi CP-S833E and CP-S833W projectors combine advanced technology with user-friendly features, making them a reliable choice for any presentation setting. Their impressive brightness, color accuracy, and versatile connectivity options ensure that they can meet the diverse needs of users, whether in classrooms or boardrooms.
Top Page Image Contents