Hitachi CP-S833E, CP-S833W specifications Remote control transmitter

Page 9

Names and functions of each part (continued)

Remote control transmitter

STANDBY / ON button

Power ON/OFF button.

OFF sets the unit in standby mode. (See page 12, 13)

FREEZE Button

Pressing this button displays a still picture (by freezing). (See page 14)

MAGNIFY button

Pressing this button partially magnifies a displayed picture. (See page 14)

STANDBY/ON MUTE

FREEZE

MAGNIFY VOLUME

OFF

POSITION ON

LASER

MUTE button

Silences the sound. (Cancels the mute when the unit is set in mute mode.)

VOLUME button

Adjusts volume. The sound is loud or low while pressing the "+" or "-" button.

LASER button

Laser pointer ON button. Use as a stick (for indication). (See page 10)

MOUSE LEFT button

Mouse left button is the left click of the

POSITION button

Moves the picture by DISK PAD after pressed the POSITION ON button. (Only RGB signal input)

While the back light on, you can operate POSITION. *1

DISK PAD

1When the back light of MENU ON button on, selects or adjusts the menu item.

(See page 15)

2When removes the on-screen menus, works as mouse.

3When the back light of the POSITION ON button on, moves picture. *2

MENU ON button

Displays the on-screen menus.

And back light on. (See page 15 ~ 18) While the back light on, you can operate MENU.

BLANK ON button

1The blank screen which is displayed by pressing BLANK.

2And the blank screen will be revealed down by pressing BLANK again.

(See page 18)

RESETRIGHT

MENU ON MOUSE ON

BLANK TIMER

RGBVIDEO

INPUT

mouse. (bottom button) (See page 22)

RESET / RIGHT button

When displays the on-screen menus, resets the menu item to factory settings.

When operates the mouse emulation, works as right click of mouse in computer mode. (See page 22)

After moving the picture (POSITION ON), resets the position to factory settings.

MOUSE ON button

Mouse emulation mode starts. (See page 22)

When menu are open or blank screen is displayed or icon of position is displayed, there are stopped and back light off.

TIMER ON / OFF button

Displays the setting time by count down. See page 18 "TIMER" of menu when you set the minutes of timer.

INPUT SELECT button

Selects the input source. (See page 12)

*1 POSITION ON icon

When presses POSITION ON button, back light on and icon is displayed.

While displaying the icon, you can operate POSITION.

Icon is displaying in video mode, but can not operate POSITION.

*2

When the back light of MENU ON or POSITION ON button on without displaying the icon of POSITION ON or MENU, can operate DISK PAD too.

Displays the icon or MENU at the same time as starting the operation.

When presses the MOUSE ON button, MENU mode or POSITION ON mode is stopped.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Contents FeaturesOutline Operating GuideFor the Customers in U.K Power cord Video signal cablesBefore use Instructions to UsersDo not install this unit in an unstable place Do not look directly at the lens when Lamp is litDo not use power supplies other Than that specified If any abnormality occursCleaning Be careful in handling the power cordHandle the power cord carefully Do not step on this unit or do not put a Heavy object on itClean inside the unit at least once two years When you are not going to use For a long timeDo not place this unit where it gets hot VolumeMain unit Names and functions of each partRemote control sensor RGB input terminal AC in socket Main Power switchRGB output terminal Video input terminalRemote control transmitter Replace the cover How to insert batteriesExample of the projector and screen installation InstallationHow to use foot adjusters View from the topTo project the picture Basic operationsPLUG&PLAY To turn off the powerMagnifying Function Freeze FunctionAdjustments and functions To return to the initial settingMemory function Adjustment Item Details of adjustment SET UPImage InputOPT Connection to the RGB signal terminal Connection to the video signal terminalsResolution Standard Display Dots KHz Type Example of computer signalInitial set signals Computer/signal Horizontal Timing µsComputer/signal Vertical Timing lines Pin No RS-232C Mouse PS/2 Control signal terminalSerial +5VPS/2 mouse ADB Mac mouseSerial mouse Control command table Control command tableCommunication Control data table Procedure of setting the Projector status Procedure of getting the Projector statusProcedure of default setting the Projector status Example of command errorConnecting various equipment Example of system setupAC Inlet VTR, etc Video model onlyInstall the air filter Cleaning the air filterHow to replace lamp Remove the lamp coverLoosen two screws and pull Handle to remove Lamp.Screw Lamp Reset the lamp timeMessage table On-screen displayWhen you think something wrong RCA Jack terminal Input terminal Input/Output Dimension diagramRCA Jack terminal Terminal Operating guide RGB cable

CP-S833W, CP-S833E specifications

The Hitachi CP-S833E and CP-S833W projectors stand out in the market for their balance of quality, performance, and versatility, making them ideal for both business presentations and educational environments. These projectors are designed to provide vibrant visuals, ensuring that audiences remain engaged and informed.

One of the main features of the CP-S833E and CP-S833W is their high brightness level, rated at around 3,000 ANSI lumens. This impressive brightness ensures that images are clear and visible even in well-lit rooms. Coupled with a high contrast ratio, these projectors deliver sharp images with deep blacks and vibrant colors, enhancing the overall viewing experience.

Both models utilize 3LCD technology, which helps in producing accurate color reproduction while minimizing the risks of color breakdown often associated with other projection technologies. The 3LCD system effectively uses three chips to project red, green, and blue light, resulting in richer and more natural images.

The Hitachi CP-S833E and CP-S833W are equipped with a native XGA resolution of 1024 x 768 pixels. This resolution strikes a good balance between image quality and performance, making it suitable for various content types, whether it be text-heavy slides, videos, or images. Furthermore, the projectors support various input options, including HDMI, VGA, and composite video, allowing for easy connectivity with a wide range of devices.

Additionally, these projectors come with features such as keystone correction and a built-in speaker, which enhance flexibility and functionality. Keystone correction allows users to adjust the projected image, ensuring it maintains a proper rectangular shape even when the projector is not perfectly aligned with the screen. The built-in speaker makes it convenient for users to present without needing additional audio equipment.

In terms of energy efficiency, both models are designed to consume less power. They feature a long lamp life, extending up to 5,000 hours in eco mode, which reduces replacement costs and contributes to lower overall operating expenses.

Overall, the Hitachi CP-S833E and CP-S833W projectors combine advanced technology with user-friendly features, making them a reliable choice for any presentation setting. Their impressive brightness, color accuracy, and versatile connectivity options ensure that they can meet the diverse needs of users, whether in classrooms or boardrooms.
Top Page Image Contents