Hitachi CP-S833W, CP-S833E specifications For the Customers in U.K

Page 2

FOR THE CUSTOMERS IN U.K

THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE U.K PLEASE REFER TO THE NOTES ON THIS PAGE.

IMPORTANT FOR UNITED KINGDOM

WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug. Fuse covers are available from your dealer.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

Should it be necessary to change the mains plugs, this must be carried out by a competent person, preferable a qualified electrician.

If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.

WARNING: THIS EQUIPMENT MUST BE EARTHED

IMPORTANT:

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow=Earth, Blue=Neutral, Brown=Live.

Green & Yellow to Earth

Brown to Live

 

Fuse

Blue to Neutral

Cord Clamp

As these colours may not correspond with the coloured makings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is

marked with the letter E or by the earth symbol

 

 

or coloured Green or Green and Yellow.

The wire coloured Blue must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Outline FeaturesContents Operating GuideFor the Customers in U.K Before use Video signal cablesPower cord Instructions to UsersDo not use power supplies other Than that specified Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place If any abnormality occursHandle the power cord carefully Be careful in handling the power cordCleaning Do not step on this unit or do not put a Heavy object on itDo not place this unit where it gets hot When you are not going to use For a long timeClean inside the unit at least once two years VolumeNames and functions of each part Main unitRGB output terminal AC in socket Main Power switchRemote control sensor RGB input terminal Video input terminalRemote control transmitter How to insert batteries Replace the coverHow to use foot adjusters InstallationExample of the projector and screen installation View from the topBasic operations To project the pictureTo turn off the power PLUG&PLAYFreeze Function Magnifying FunctionMemory function Adjustments and functionsTo return to the initial setting SET UP Adjustment Item Details of adjustmentInput ImageOPT Connection to the video signal terminals Connection to the RGB signal terminalExample of computer signal Resolution Standard Display Dots KHz TypeComputer/signal Vertical Timing lines Initial set signalsComputer/signal Horizontal Timing µs Serial Control signal terminalPin No RS-232C Mouse PS/2 +5VSerial mouse PS/2 mouseADB Mac mouse Communication Control command tableControl command table Control data table Procedure of default setting the Projector status Procedure of getting the Projector statusProcedure of setting the Projector status Example of command errorAC Inlet Example of system setupConnecting various equipment VTR, etc Video model onlyCleaning the air filter Install the air filterLoosen two screws and pull Handle to remove Lamp.Screw How to replace lampRemove the lamp cover Message table Reset the lamp timeLamp On-screen displayWhen you think something wrong RCA Jack terminal Terminal Dimension diagramRCA Jack terminal Input terminal Input/Output Operating guide RGB cable

CP-S833W, CP-S833E specifications

The Hitachi CP-S833E and CP-S833W projectors stand out in the market for their balance of quality, performance, and versatility, making them ideal for both business presentations and educational environments. These projectors are designed to provide vibrant visuals, ensuring that audiences remain engaged and informed.

One of the main features of the CP-S833E and CP-S833W is their high brightness level, rated at around 3,000 ANSI lumens. This impressive brightness ensures that images are clear and visible even in well-lit rooms. Coupled with a high contrast ratio, these projectors deliver sharp images with deep blacks and vibrant colors, enhancing the overall viewing experience.

Both models utilize 3LCD technology, which helps in producing accurate color reproduction while minimizing the risks of color breakdown often associated with other projection technologies. The 3LCD system effectively uses three chips to project red, green, and blue light, resulting in richer and more natural images.

The Hitachi CP-S833E and CP-S833W are equipped with a native XGA resolution of 1024 x 768 pixels. This resolution strikes a good balance between image quality and performance, making it suitable for various content types, whether it be text-heavy slides, videos, or images. Furthermore, the projectors support various input options, including HDMI, VGA, and composite video, allowing for easy connectivity with a wide range of devices.

Additionally, these projectors come with features such as keystone correction and a built-in speaker, which enhance flexibility and functionality. Keystone correction allows users to adjust the projected image, ensuring it maintains a proper rectangular shape even when the projector is not perfectly aligned with the screen. The built-in speaker makes it convenient for users to present without needing additional audio equipment.

In terms of energy efficiency, both models are designed to consume less power. They feature a long lamp life, extending up to 5,000 hours in eco mode, which reduces replacement costs and contributes to lower overall operating expenses.

Overall, the Hitachi CP-S833E and CP-S833W projectors combine advanced technology with user-friendly features, making them a reliable choice for any presentation setting. Their impressive brightness, color accuracy, and versatile connectivity options ensure that they can meet the diverse needs of users, whether in classrooms or boardrooms.
Top Page Image Contents