Hitachi 53SWX01W, 61SWX01W manual Rear Panel Jacks, Monitor OUT

REAR PANEL JACKS

ANT A

OPTICAL

INPUT

COAXIAL

INPUTTO

CONVERTER

REAR SPEAKER 8Ω ONLY

R L ANT B

R	L
AUDIO	SUB
TO HI-FI	WOOFER

		STOP
		CONNECT ONLY 8 OHM SPEAKERS
		DO NOT SHORT CIRCUIT
		THESE TERMINALS
		(Such damage is NOT COVERED
		by your television warranty)
S-VIDEO		S-VIDEO		S-VIDEO
VIDEO	Y	VIDEO	Y	VIDEO
(MONO)	PB	(MONO)	PB	L
L		L
	PR		PR
R		R		R
AUDIO		AUDIO		AUDIO
INPUT 1		INPUT 2		MONITOR
				OUT

Antenna Input/Output

The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a sub-picture.) The antenna output labeled TO CONVERTER allows the ANT A connection to pass directly to a different source such as a cable box, only when ANT B is displayed as a main picture.

Audio/Video Inputs 1 and 2

The INPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, insert the audio cable into the left audio jack.)

NOTE: You may use VIDEO, S-VIDEO, or COMPONENT: Y-PBPRinputs to connect to INPUT 1 and 2, but only one of these inputs may be used at a time.

MONITOR OUT

These jacks provide fixed audio and video signals which are used for recording. Use the S-VIDEO Output for high quality video output.

NOTE: S-VIDEO Output may be used for recording, only when the input is of S-VIDEO type.

AUDIO TO HI-FI Output

These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be controlled by the television s main volume.

SUB WOOFER Output

This jack provides variable audio output to a sub-woofer accessory. With this connection, the audio can be controlled by the television s main volume. This feature can be turned on and off in the THEATER-SPEAKER SETUP menu.

REAR SPEAKER Output Terminals

These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is controlled by the television s main volume. These speaker output terminals can be turned on and off in the THEATER-SPEAKER SETUP menu. Use speakers with 8-Ohm impedance only.

S-VIDEO Inputs 1 and 2

Inputs 1 and 2 provide S-VIDEO (Super Video) jacks for connecting equipment with S-VIDEO output capability.

11