Hitachi 53SWX01W, 61SWX01W manual Fill, Position, Component Color Type

SET UP

SET UP

	ASPECT STYLE
Fill	Choose this when receiving a 4:3 image and you do not want side
	panels on the right and left sides of the screen. The television will
	adjust the image both horizontally and vertically so it fills the
	height and width of your 16:9 screen with no side panels added.
	It will also maintain the correct image proportion. Use with
	material such as letterboxed laserdiscs or VCR tapes.

Smooth Wide Choose this when receiving a 4:3 image and you do not want side panels on the right and left sides of the screen. The television will proportionally adjust the image horizontally so it fills your 16:9 screen with no apparent distortion or side panels added.

Some digital (ATSC format) stations may transmit 4:3 images in a way that will not allow expansion. You will be unable to adjust the screen format.

V. POSITION

Adjust this when viewing a COMPONENT: Y-PBPRsignal. This feature is used to center an HDTV video signal between the top and bottom gray bars. Adjustable range is -10(video center is toward bottom of screen) to +10(video center is toward top of screen).

COMPONENT COLOR TYPE

This function allows you to automatically change tint and color coordinates for DTV programs. HDTV - High Definition Television - Use for High Vision Signal Y-PBPRfrom HDTV Set-Top Box.

SDTV /DVD - Standard Definition Television or Digital Video Disc Y-CBCRsuch as DVD (Digital Video Disc Player).

NOTES: 1. The aspect Style setting you select for an ANT input will automatically be set for the other ANT input. However, all three video inputs have independent Aspect Style settings.

2.You will not be able to access the V. Position menu if Aspect Style-Normal is set.

3.You will only be able to access the Aspect Style menu when viewing a 4:3-480i, 480P, or 720P input. When viewing a 16:9-1080i input you will not be able to access this menu.

4.If CONVERGENT COLOR TYPE is set improperly (does not match actual input signal), the color and tint of the main picture will be abnormal.

5.You must be tuned to VIDEO: 1 or 2 input and have a component hooked up to the Y-PBPRinput jacks to access this component color type.

6.All component color type settings will affect only color component input you are currently viewing. If you are using both sets of component input jacks, be sure to set the component color type feature for both inputs (set COMPONENT 1 AND COMPONENT 2).

49