Hitachi 55DMX01WD specifications Position, Clock

PC ON SCREEN DISPLAY

H POSITION

This feature allows you to adjust the horizontal position of the display.

Use Left/Right cursors to adjust the horizontal position. Press the MENU button to return to initial position of menu icon and EXIT to quit.

H POSITION 50

V POSITION

This feature allows you to adjust the vertical position in PC mode.

Use Left/Right cursors to adjust the vertical position. Press MENU button to return to initial position of menu icon and EXIT to quit.

V POSITION 50

CLOCK

Adjusts the dot clock frequency to reduce the vertical stripe. Sampling clock of Mulit-Scan Converter unit is changed when pressing CURSOR LEFT ( ) or CURSOR RIGHT ( ) buttons.

Use Left/Right cursors to adjust the clock. Press the MENU button to return to initial position of menu icon and EXIT to quit.

CLOCK 50

NOTE: 1. Due to varying signal content, you may see vertical or horizontal lilnes bend occasionally in PC mode. However, this phenomenon is not a defect. It’s caused by a lack of picture content due to under-scanning in PC mode.

2.This set provides the best picture quality in SVGA mode. It is recommended that you set your PC to SVGA mode. In OVERSCAN mode, top/bottom icon will be approximately 19% to 50% within the viewable area, and should be accessible to grab and click. Picture is overscanned when receiving XGA or higher resolution.

75