NetCommand™ Setup, cont’d.
DBS Screen
Figure 1
The DBS (Digital Broadcast Satellite) screen allows you to select the manufacturer of the satellite system you are currently using. If “Other” is selected for the Manufacturer, then NetCommand™ can not control the device (use the layer switch on
the remote or use the remote for the device). The bottom of the screen shows the model optimized for
NetCommand™ programming. Other models from Figure 1. DBS screen. the same manufacturer are often compatible. If the
manufacturer’s name is followed by a number, this indicates additional models are optimized. For the Manufacturer, select “None” if you don’t have the device.
Camcorder Screen
Figure 2
The Camcorder screen allows to indicate whether or not you have a camcorder connected to the TV. You may want to reserve an input for your camcorder. While your Camcorder cannot be controlled by NetCommand™, you can still switch to the Camcorder input when you would like to view your camcorder. Keep the box checked to reserve
Input 5 (Front Panel) for your Camcorder. Remove Figure 2. Camcorder screen. the check mark to turn off Input 5.
DVD Screen
Figure 3
The DVD screen allows you to select the manufacturer of the DVD Player that you are currently using. If “Other” is selected for the Manufacturer, then NetCommand™ can not control the device (use the layer switch on the remote
or use the remote for the device). The bottom of the screen shows the model optimized for
NetCommand™ programming. Other models from
the same manufacturer are often compatible. If the Figure 3. DVD screen. manufacturer’s name is followed by a number, this
indicates additional models are optimized. For the Manufacturer, select “None” if you don’t have the device.
30