Mitsubishi Electronics WS-48511, WS-B55, ws-65712 Edit NetCommand, cont’d, Delete, Review, Initial

Edit NetCommand™, cont’d.

Delete

Figure 1

	When you select Delete from the Edit
	NetCommand™ Screen, you will see the Delete
	Screen. You can choose to delete just a single
	device by selecting the device you would like to
	delete, or you can delete the entire NetCommand™
	configuration. After you have chosen the device,
	or the Entire Configuration, you will be prompted
Figure 1. Delete screen.	to confirm your choice to delete. If you select the
	Entire Configuration, the Initial button becomes
	available on the Edit NetCommand™ screen.

Review

Figure 2

	When you select Review from the Edit
	NetCommand™ Screen, you will see the Review
	Screen. This is the same Review Screen from the
	Initial Setup.
	On this screen, adding or deleting check marks will
Figure 2. Review screen.	turn On or Off the adjacent Input or Device.

Initial

Figure 3

If, for any reason, you cancelled out of the Initial Setup before completion, or if you deleted the entire configuration, select Initial from the Edit NetCommand™ Screen to go through initial setup again, starting with the A/V Receiver screen.

Figure 3 Edit NetCommand™ (Initial) screen

IMPORTANT

NetCommand™ does not allow you to delete a device or change the connections for a device (like a VCR or a DVD player) if the device is currently in use.

Switch the TV to a different device from the one you are changing or deleting. To change the A/V Receiver, you need to be listening to the TV speakers.

33