Mitsubishi Electronics WS - 48313, WT - 42313 manual Connecting an Antenna or Wall Outlet Cable

Connecting an Antenna or Wall Outlet Cable

Note: The TV back panel and connections shown here are for reference only and may vary by model.

������������	�������������
���������������	����������������
���������������	��������������
��������
�������
��������

�������������������������������

����������	�� � � �	� �� �	� � � � �
���������������		���
���	�
���

���� ����

�

Figure 1. Connecting separate UHF and VHF antennas.

Note: See page 5 for Outdoor Antenna Grounding

Separate UHF and VHF Antennas

(Figure 1)

1.Connect the UHF and VHF antenna leads to the UHF/VHF combiner.

2.Push the combiner onto ANT-A on the TV back panel.

UHF/VHF combiners are not provided with

the TV. They are available at most electronic stores.

Note: This TV will only be able to provide an analog signal through ANT-A on the TV back panel.

Additional connection cables are not provided with the TV. They should be available at most electronic stores.

������������������

��������� �������������

�

�

�

�������������������������������

	� �� �
�� � � �	��� � � � � �

Twin Lead Antenna, Coaxial Lead Antenna, or Wall Outlet Cable

(Figure 2)

For antenna with twin flat leads:

1.Connect the 300ohm twin leads to the transformer.

2.Push the 75ohm side of the transformer onto ANT-A on the TV back panel.

��������������������������

��������������������

Figure 2. Connecting twin lead antenna, coaxial lead antenna, or wall outlet cable.

Note: See page 5 for Outdoor Antenna Grounding

300ohm to 75ohm matching transformers are not provided with the TV. They are available at most electronic stores.

For cable or antenna with coaxial lead:

3.Connect the incoming cable to ANT-A on the TV back panel.

Note: This TV will only be able to provide an analog signal through ANT-A on the TV back panel.

14