Mitsubishi Electronics WS - 55313, WT - 42313 Terminal Cover Ventilation for Model WT-, Wall

Terminal Cover Ventilation for Model WT-

	AIR CIRCULATION TIP
Wall	When considering the location or position of your TV,
	we recommend you place it at least 2” (inches) away from
	the wall. Like most electrical equipment and appliances,
	better air circulation allows your television to run cooler,
	assuring a long, trouble-free life.

At Least 2” (Inches) Away from Wall

SIDE PANEL FOR INPUT TERMINAL

Included in the accessories bag is the side panel to cover the input terminals, located on the bottom right of your TV. See diagram. Follow the steps below to attach or remove this side panel:

1.Remove the side panel from the accessories plastic bag attached to the back of your TV.

2.Route all of the cable downward so the cover can close over them.

3.Position the three tabs directly opposite the three slots (see diagram) and gently push toward the front of the TV.

4.Slide the two push tabs into the slots on the other side of the terminals until both tabs snap into place.

Slots for Push Tabs

Side Panel

Tabs Push Tabs

Result: The side panel neatly covers the input jacks.
Reverse these steps to remove the side panel from the
input terminal.	Slots

STAND REQUIREMENT

CAUTION: This PTV for use only with Mitsubishi stand MB-. Use with other stands is capable of resulting in instability causing possible injury.

71