Mitsubishi Electronics WS-48513, WS-65513, WS-48613 Activating the Circuit Adjustment Mode

Circuit Adjustment Mode

Most of the adjustments can only be performed us- ing the remote hand unit. See Figure 2-2. Many of the adjustments must be performed in both the 480i and 1080i modes. Video/Color adjustments must be performed in the 480i and 1080i modes, and data must be preset in the 480P (DVD) and VGA modes.

Note: Set the Remote Operational Mode to “NetCommand”. (Hold the “Power” button and press “9-3-5” in sequence.) This slows the remote’s response and makes adjustments easier. When adjustments are complete, set the Remote to its’ original Operational Mode. (Hold the “Power” button and press “0-0-0” in sequence)

Activating the Circuit Adjustment Mode

The current signal source determines if the activated

Adjustment Mode is 480i or 1080i.

1.Select the signal source (480i or 1080i).

2.Press the "MENU" button on the remote control so the Main Menu is displayed.

3.Press the number buttons "0", "3", "5", "7" in sequence. The screen will change to the Circuit Adjustment Mode. See Figure 2-3.

Note: Repeat steps 2 and 3 if the circuit ad- justment mode does not appear on screen.

Figure 2-2: Remote Control

CHASSIS	V23
FUNCTION	DECODER 1
ADJ ITEM	22 SCNT 16 480i SIGNAL

ABBREV. DATA

Figure 2-3: Circuit Adjustment Mode

2-3