Mitsubishi Electronics WS-55513 Selection of adjustment Functions Adjustment Items, Changing Data

Selection of adjustment Functions and
Adjustment Items
To select an adjustment item in the circuit
	CRT-VC			CRT-JNGL
adjustment mode, first select the adjustment
		Adjustment Functions
function that includes the specific adjust-
ment item to be selected. Then select the	DECODER 2		DECODER 1	DOUBLER
adjustment item. Refer to the following
	Figure 2-4: Adjustment Functions
pages for the listing of adjustment functions

and adjustment items.
1)	Press the "AUDIO" button on the remote	Terminating the Circuit Adjustment Mode
	hand unit to select an adjustment function.	Press the “MENU” button on the remote hand unit
	Each time the button is pressed, the Func-	twice to terminate the adjustment mode.
	tion changes in the sequence shown in
	Figure 2-4.	Note: The circuit adjustment mode can also
2)	Press the “VIDEO” button to select a spe-	be terminated by turning the power OFF.
	cific Adjustment Item. The Item number
	increases each time the “VIDEO” button is	Toggle Between Reception Modes
	pressed.	Pressing “3” when in the Adjustment Mode, CRT-
Changing Data		VC Function toggles between 480i, 480p, 1080i and
		VGA. However, data changes are not automatically
After selecting an adjustment Item, use the “AD-		saved. Press “ENTER” to save data before press-
JUST UP/DOWN” buttons to change data.		ing “3”.
•	Press “ADJUST DOWN” to decrease the
	data value.	NEW FEATURE… Service Mode Reset
•	Press “ADJUST UP” to increase the data	To reset items in the Service Mode to their original
	value.	factory adjusted values:
Saving Adjustment Data		1) Press MENU-0-3-5-7 to enter the Service
		Mode.
Press “ENTER” to save adjustment data in memory.		2) Press “0-1-2-3,” in sequence to Reset to the
The character display turns red for approximately		Factory settings.
one second in this step.
Note: If the circuit adjustment mode is ter-		On Screen Display Position Adjustment Mode
		Activation
minated without pressing “ENTER”, changes		1) Select 480i or 1080i source.
in adjustment data are not saved.		2) Press MENU-0-3-8-8

2-4