Mitsubishi Electronics WS-65815, WS-55815 manual Advanced Convergence, Reset Factory Defaults Menu

Page 60

Setup Menu, continued

Convergence, continued

Figure 10

When the Red and Blue crosshairs are properly converged, the center-screen crosshairs will appear white. You can press ADJUST , ,orto move the Red and Blue crosshairs. Press VIDEO to switch between Red and Blue. Press AUDIO for the Advanced Convergence screen.

Red

Press ADJUST to converge the lines.

Press VIDEO to switch from Red to Blue.

Press MENU to go back.

Press CANCEL to delete changes.

Press AUDIO for Advanced Convergence.

Figure 10. Red Convergence Menu

Advanced Convergence

Figure 11

After adjusting the Red Convergence and Blue Convergence, you can fine-tune your TV by adjusting the Red and Blue convergence at 64 individual points.

1.Move the flashing bracket to a position needing adjustment by pressing ADJUST , , or .

2.Press ENTER to select the position (flashing will stop).

3.Move the Red or Blue line by pressing , , or .

4.Press ENTER to deselect the position (flashing will resume), and move the brackets to the next position needing adjustment.

5.Press VIDEO to switch between the Red and Blue lines. A position is properly converged when all three lines combine to appear white.

6.When completed, press MENU or HOME to save your changes, and exit the Advanced Convergence screen.

7.You may also press INFO to display detailed instructions on using the Advanced Convergence. Then press INFO or MENU to return to the Advanced Convergence menu.

Press INFO for help

Figure 11. Advanced Convergence Menu

IMPORTANT

Although there are more than 64 line intersections, the flashing bracket only stops at 64 adjustment positions.

Reset Factory Defaults Menu

Figure 12

This allows you to reset the convergence to the original factory settings. The message “Convergence reset completed” will be displayed when the factory defaults have been restored.

WARNING: RESET CONVERGENCE TO

FACTORY DEFAULTS.

All manual changes to red and blue convergence and advanced convergence will be deleted.

Press ENTER to Reset convergence to the defaults.

Press HOME or MENU to return to the menu without resetting convergence.

Figure 12. Reset Factory Defaults Menu

60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Projection Television Owner’s Guide Risk of Electric Shock Contents Cleaning AccessoriesPower Source Power-Cord ProtectionPower Lines Damage Requiring ServiceReplacement Parts Safety CheckOur Thanks Mitsubishi Digital Electronics America, IncChapter Television OverviewTV Accessories Special FeaturesFront Control Panel, Multimedia Access Multimedia AccessFront Control Panel Back Panel IEEE-1394 Input/OutputDigital Audio Output IR Output-NetCommand CableCARD SlotHdmi or DVI Devices DVI Analog AudioLetterbox top/bottom black bars Side bar imagesNews and stock-market report bars Shopping channel logos & pricing displaysConnecting Connecting External Devices & NetCommand Setup Device Audio and Video Outputs to TV InputsConnecting a Wall Outlet Cable or Cable Box Cable Box compatible with PIP/POPSingle Antenna Separate UHF and VHF AntennasFor antennas with twin flat lead For antennas with coaxial leadVCR to Antenna or Wall Outlet Cable RedConnecting VCR Video and Audio to a Cable Box VCR to a Cable BoxReceiver or Stereo System Satellite Receiver or Other Device with S-VideoConnecting a DVD Player with Component Video or DVI Device DVD Player with Component VideoDVI Device Hdmi Device External DTV Receiver with Component VideoConnecting the IR Emitter NetCommand IR Emitter NetCommandConnecting Ieee 1394 Devices Pin Style vs -Pin StyleIeee 1394 Device Connection Styles Connection StylesDirect Device-To-Device Style Hub Connection StyleUsing a CableCARD CableCARD Definition and Initial Screen DisplayCableCARD Technology Connecting Helpful Hints NetCommand Setup and Editing NetCommand Pre-Memorized Devices DeviceNetCommand On-Screen Buttons Remote Control Functions Overview FollowingRemote Control FunctionsOperation, Care, Sleep Timer Sleep TimerCare OperationRemote Control Buttons 3D Graphical Menu SystemNetCommand Initial Setup NetCommand Information ScreenDevice Setup Screen Welcome ScreenReview Screen Finish ScreenEdit NetCommand, Adding an A/V Receiver Receiver ScreenReceiver Inputs Receiver Input Learn Screen Receiver Learn ScreenName Screen Monitor Out to AVR ScreenEdit NetCommand, Adding Devices Edit NetCommandAdd Screen Device ScreenDevice Learn Screen Device Advanced Learn ScreenConnection for Device Screen VCR for Recordings ScreenRF Connection for Cable Screen IR Code for Device ScreenChange Screen Delete ScreenDevice Selection Menu Using the Device Menu Button to Display Menus Device MenuIeee 1394 Devices and NetCommand Controlled Recordings Adding Ieee 1394 Devices Automatically Adding Ieee 1394 Devices AutomaticallyNew 1394 Device Screen Name for 1394 Device ScreenIeee 1394 Device Type Screen Connection ScreenDigital Video Signals Digital Audio SignalsDigital Control Signal Ieee 1394 Devices CompatibilityUsing the Guide Button to Display ChannelView and Menus NetCommand Controlled Recordings Record To SetupTime-Delayed Recording Copy-Protected MaterialCancel Current Recordings Record List ScreenDisc Search Track List ScreenNetCommand Controlled Peer-to-Peer Connections What is a Peer-to-Peer Connection?Setting up a Peer-to-Peer Connection Canceling a Current Peer-to-Peer ConnectionDirect VCR Recording Direct VCR Recording from an Antenna or Cable SourceRestrictions for Traditional VCRs MediaCommand and Media Card Playback Media Card SlotsInserting a media card For MP3 or WMA Audio PlaybackMedia Command and Media Card Playback Important Notes TV Menu Screen Operations Main Menu Choices Setup Menu Reset Factory Defaults Menu Advanced ConvergenceNetCommand Menu Antenna Menu SQV SuperQuickView Setting the Clock Timer On/OffTime Menu ManualCaptions Menu Captions MenuAnalog Captions Digital CaptionsFonts SizeColor Opacity FontChip Lock Menu ChipEntry Chip Start Time and V-Chip Stop TimeChip Signal Information Content CategoriesTV Ratings Lock By Time Front Button LockAudioVideo Menu AudioVideoSetting Descriptions Analog and Digital Audio SettingAnalog Only Audio Settings Digital Only Audio SettingsVideo Settings Chapter Format Signals Display FormatsFormat Definitions DVD DefinitionsOriginal Signal Operation of PIP and POP POPPIP large PIP small PIP/POP offDevice Menu with Net Command CH up/downVOL up/down DigitsWhen an Ieee 1394 Device is Viewed or Played Appendix a Bypassing the V-Chip Lock Bypassing the V-Chip LockBypassing Front Button Lock This page intentionally blank Input Levels and Timing with Component Video Signals Appendix B High Definition Input Connection CompatibilityComponent-1 and Component-2 Inputs Appendix CRemote Control Programming Codes Programming the Remote to Control NetCommand A/V ProductsAppendix C Remote Control Programming Codes DVD PlayersCable Boxes and Satellite Receivers ReceiversMitsubishi A/V Receivers Mitsubishi CD Players Not all functions for all modelsAppendix D On Screen Information Displays Analog ProgramDigital Program Digital Ieee 1394 DeviceAppendix E NetCommand Specialized Device Keys Checkbox NameAppendix F Cleaning and Service Diamond Shield installation Diamond Shield RemovalFor additional assistance, call 800 For Mitsubishi Dealers and Service Personnel Only Appendix H Cabinet Separation for Model WS-65815Troubleshooting Problem Possible SolutionTroubleshooting Troubleshooting Troubleshooting Demo Mode Additional InformationLicensing Information Index Menu 58 Mitsubishi Projection TV Limited Warranty Mitsubishi Projection Television Limited WarrantyMitsubishi TV Software Mitsubishi Digital Electronics America, Inc 871D406A10

WS-55815, WS-65815 specifications

The Mitsubishi Electronics WS-65815 and WS-55815 are high-quality rear-projection televisions that gained popularity in the early 2000s for their impressive display performance and advanced features. These models were designed to provide an immersive viewing experience, highlighting Mitsubishi's commitment to innovation in the home entertainment market.

One of the standout features of the WS-65815 and WS-55815 is their large screen sizes. The WS-65815 offers a massive 65-inch display, while the WS-55815 comes in at 55 inches. Both models utilize a DLP (Digital Light Processing) technology that delivers exceptional picture quality with vibrant colors and sharp details. DLP technology also contributes to deeper blacks and a higher contrast ratio, enhancing the overall visual experience.

Mitsubishi incorporated a 16:9 aspect ratio in both models, which is ideal for watching widescreen content, such as movies and sports events. The advanced color wheel in these televisions enhances the saturation and chromatic accuracy of the images displayed. Additionally, both models support 1080p resolution, making them compatible with high-definition broadcasts and Blu-ray Disc viewing, ensuring users can enjoy stunning picture clarity.

Another key characteristic of the WS-65815 and WS-55815 is their integrated video processing technology. The units feature a built-in 3D Y/C digital comb filter that significantly improves image quality by reducing artifacts and enhancing detail resolution. The televisions also offer multiple input options, including HDMI and component video, allowing users to connect various devices such as gaming consoles, cable boxes, and DVD players seamlessly.

The design of both models is characterized by a sleek cabinet finish, which allows them to blend seamlessly into modern home décor. Furthermore, the televisions are equipped with a user-friendly remote control with programmable features, enabling easy navigation through channels, inputs, and settings.

In summary, the Mitsubishi Electronics WS-65815 and WS-55815 rear-projection televisions stood out for their impressive screen size, advanced DLP technology, and rich, immersive picture quality. These models remain noteworthy examples of Mitsubishi’s innovation in television technology, making them desirable among enthusiasts even in today’s evolving market.
Top Page Image Contents