Plugging in the power cord, EN-15 | Mitsubishi Electronics HC2000

Connecting to video equipment having a DVI-D terminal

You can project high-quality images by connecting the DVI terminal of this projector to video equipment having a DVI-D output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data that are output from DVD players.

Equipment having a		Audio cable(Option)
	To audio output	To audio input
DVI-D terminal
	terminal	terminal

			DVI
To DVI-D terminal
Y	Cb/Pb	Cr/Pr	VIDEO
G(Y)	B(Cb/Pb)	R(Cr/Pr)	V
		RS-232C	VIDEO

DVI cable (Option)

To DVI terminal

•For connection to the DVI terminal, use a commercially available DVI cable.

•Select DVI-DIGITAL as the input source.

•Only RGB signals are supported. Component video signals are not supported.

•HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital video data for the purpose of copy protection.

•When DVI-D is selected as the input source, setting of COLOR, TINT, SET UP, TRACKING, H.PPSITION, V.POSITION and FINE SYNC. is unavailable.

When you connect this projector and a DVI-Digital device (such as a DVD player) via the DVI terminal, black color may appear light and pale, depending on the type of the connected device.

•This depends on the black level setting of the connected device. There are two kinds of methods to digitally transfer image data, in which different black level settings are employed respectively. Therefore, the specifications of the signals output from DVD players differ, depending on the type of the digital data transfer method they use.

•Some DVD players are provided with a function to switch the methods to output DVI-Digital signals. When your DVD player is provided with such function, set it as follows.

NORMAL ➔ EXPAND or ENHANCED

•See the users guide of your DVD player for details.

•When your DVD player does not have such function, set BRIGHTNESS of this projector to -7. When you have more than one DVD player, it is convenient to store the image quality settings for each DVD player in the memory.

ENGLISH

B. Plugging in the power cord

LAMP TEMP POWER

Earthing terminal

MAIN

1Plug the attached power cord into the power cord inlet of this projector.

2Plug the other end of the power cord into a power outlet.

Power cord (Example)

•The power cords for use in the U.S. and Europe are included with this projector. Use the appropriate one for your country.

•This projector uses the power plug of three-pin grounding type. Do not take away the grounding pin from the power plug. If the power plug doesn’t fit your wall outlet, ask an electrician to change the wall outlet.

•The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power supply using other voltages or frequencies than rated. If you use a power supply using other voltage than rated, prepare an appropriate power cord separately.