Mitsubishi Electronics HC2000 user manual EN-25, Installation Menu

Page 25

4. Installation Menu

 

ITEM

SETTING

FUNCTION

TEST PATTERN

The test pattern for focus adjustment is displayed when the ENTER button

 

 

is pressed.

SIGNAL SETTING

Use to adjust the image supplied from the computer.

 

TRACKING

Use to eliminate vertical wide stripes, if appears, viewing the projected

 

 

image.

 

FINE SYNC.

Use to eliminate flickering or blur, if appears, viewing the projected image.

 

H.POSITION *

Use to adjust the horizontal position of the projected image.

 

V.POSITION *

Use to adjust the vertical position of the projected image.

COMPONENT

AUTO

Select this option in normal use. Input signals are automatically

 

 

recognized.

 

RGB

Select this option when connecting the projector to high definition video

 

 

equipment having R, G, and B output terminals.

 

YCbCr

Select this option when connecting the projector to a DVD player or other

 

 

device having Y, CB, and CR component video output terminals.

 

YPbPr

Select this option when connecting the projector to a MUSE recorder or

 

 

other device having Y, PB, and PR component video output terminals.

ASPECT

STANDARD

Select to change the aspect ratio automatically depending on the input

 

 

signal.

 

16:9

Select to project images with an aspect ratio of 16:9.

 

ZOOM1/2/3

Select to enlarge and project images of CinemaScope size, Vista size, or

 

 

European Vista size.

 

REAL

Select to project images in their original size as input.

MIRROR

FLOOR FRONT

Select when viewing images from the front with the projector installed on

 

 

the floor.

 

CEILING FRONT

Select when viewing images from the front with the projector installed on

 

 

the ceiling.

 

FLOOR REAR

Select when viewing images projected from the behind of the screen with

 

 

the projector installed on the floor.

 

CEILING REAR

Select when viewing images projected from the behind of the screen with

 

 

the projector installed on the ceiling.

KEYSTONE

H.KEYSTONE

Use to correct horizontal keystone distortion.

 

V.KEYSTONE

Use to correct vertical keystone distortion.

LANGUAGE

9 languages

Use to select the language used in the menus.

EXPAND

 

Use to enlarge the projected image. (You cannot change the display position

 

 

after enlargement.)

•SIGNAL SETTING Menu is not displayed when DVI-D is selected as the input source.

•Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.

•Options marked with * become unavailable depending on the type of the input signal.

•When you change the horizontal or vertical position to a large extent, noise may appear.

•The adjustable range of the vertical position varies depending on the type of the input signal. Though the image may stay in the same position even when the setting value is changed, such symptom is not a malfunction.

ENGLISH

EN-25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HC2000 Please read it before using your projectorEN-2 When using the projector in EuropeContents EN-4 Important safeguardsDo not modify this equipment Never remove the cabinetIf you break or drop the cabinet Do not face the projector lens to the sunPreparating your projector Checking accessoriesInserting the batteries into the remote ControlControl area OverviewEN-7 Preparating your projector Continue Power / indicators areaTerminal panel Bottom sideOverview of the remote control Using the remote controlUsing the picture quality adjusting buttons EN-9Operational range of the remote control Using the remote control ContinueReception angle EN-10Setting up the screen Setting up your projectorBasic setup Adjusting the projection angleWhen the aspect ratio of the screen is Setting up your projector ContinueScreen size and projection distance EN-12EN-13 Connecting to a DVD player Connecting the projector to video equipmentViewing video images EN-14Plugging in the power cord Connecting to video equipment having a DVI-D terminalEN-15 Projectiing images Viewing video imagesEN-16 PreparationEN-17 To stop projectingHow to change the settings Setting the aspect ratioEN-18 Plugging the power cord Connecting the projector to a computerViewing computer images EN-19EN-20 Example of the setting procedure for external output When connecting to a notebook computerAuto Position button Auto button EN-21EN-22 Menu OperationEN-23 How to set the menusMenu operation Available settings in the menusEN-24 EN-25 Installation MenuTo store the settings To store the image quality settingsTo enable the stored image quality settings EN-26To adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To sharpen or soften the projected image SharpnessTo adjust the tone of white Color Temp Adjusting projected imagesEN-28 EN-29 Special initial settingsTo replace the lamp Replacing the lampEN-30 EN-31 How to reset the lamp operating timeTo clean the filter CleaningCleaning dust in the intake vent EN-32Dimension Drawings unit mm Asking for installationEN-33 To view images projected on the translucentNo image appears on the screen Problem Solution TroubleshootingEN-34 Others Problem Solution Images are not displayed correctly Problem SolutionProblem Solution EN-35Replacement part Option / Not included in the box SpecificationsEN-36 Connectors Type of connectable signalsEN-37 North America Mitsubishi Projector Contact Information
Top Page Image Contents