Mitsubishi Electronics X100 manual Gamma Correction menu

GAMMA CORRECTION menu

The proportion of the brightness of input signals to that of output signals can be corrected effectively by adjusting GAMMA.

1.Select GAMMA CORRECTION of NORMAL menu and then press the ENTER button. (The GAMMA CORRECTION menu appears on-screen display.)

GAMMA CORRECTION

RETURN

MASTER

R

G

B

RESET

Horizontal axis: brightness of the input signals

Vertical axis: brightness of the output signals

Inclination: GAMMA

2.Press the ª or º buttons on the control panel (or { or } buttons on the remote control) to select MASTER.

3. Press the	or	buttons on the control panel (or $ or % buttons	GAMMA
			CORRECTION
on the remote control) to select the points brightness of the input
				MASTER
signals.				R
4. Press the ª or º buttons on the control panel (or { or } but-				G
				B
tons on the remote control) to adjust the brightness of the output			RETURN
signals.

5.Repeat steps 3 and 4 for another point setting.

6.Press the ENTER button.

If you wish to change the color balance, follow the steps below.

7.	Press the ª or º buttons on the control panel (or { or }			GAMMA
	buttons on the remote control) to select the desired color R, G or B.			CORRECTION
					MASTER
8.	Press he	or	buttons on the control panel (or $ or % buttons		R
	on the remote control) to select the points brightness of the input				G
					B
	signals.
				RETURN

9.Press the ª or º buttons on the control panel (or { or }

buttons on the remote control) to adjust the brightness of the output signals.

10.Repeat steps 3 and 4 for another point setting.

11.Press the ENTER button.

12.Exit the menu system by pressing the MENU button.

•To switch back to the default condition of GAMMA CORRECTION, select RESET and press the ENTER button when the GAMMA CORRECTION display appears.

•When selecting RESET, the buttons cannot be operated for 2 to 18 seconds.

27