Mitsubishi Electronics X100 manual Enhanced menu, Reverse

Menu operation (continue)

ENHANCED menu

The following adjustments for enhanced items can be done in this menu.

HELP

NORMAL

ENHANCED

POINTER

AUDIO

OPTION

QUIT

IMAGE

REVERSE

OFF

MIRROR

INVERT

MIRROR

INVERT

KEYSTONE

0˚

3˚

6˚

9˚

12˚

15˚

ZOOM/

SUPER

ZOOM

SUPER IMPOSE

SOURCE ID BLUE BACK

ON	ON
OFF	OFF

TEST

PATTERN

OFF

1

2

3

4

5

RESET

IMAGE	Use to reverse or invert the projected image. MIRROR is usedfor rear projection.
REVERSE	INVERT is effective when the projector is ceiling-mounted.

KEYSTONE Adjusts keystone correction of the image. If the image becomes keystone distortion, select the approximate setting. For normal use, select 0˚.

•Do not adjust keystone in the PinP mode.

ZOOM/SUPER Sets the detail settings for zoom or super impose. Select the desired items by press- ing the ª or º button on the control panel (or { or } button on the remote control) and press the ENTER button. The desired setting menu appears.

(For more details for ZOOM and SUPER IMPOSE, refer to pages 34 and 35.)

ZOOM

ZOOM

RETURN

FRAME	SIZE		PAN			FRAME	FRAME
MODE						POS	SIZE
1				H-POS		1	1
						2	2
2	0	V-POS			0	3	3
3		0				4

RESET

FRAME MODE

Selects the desired type of zoom. Select the desired type, 1, 2 or 3 by pressing the

ªor º buttons on the control panel (or { or } buttons on the remote control) and press the ENTER button.

Type 1 : Main image = normal picture , Sub image = zooming picture

Type 2 : Main image = zooming picture , Sub image = normal picture

Type 3 : Main image = zooming picture , Sub image = not appears.

SIZE Adjusts zoming magnification. The selectable values are 1.0 - 5.0.

•The magnification for zooming is actually the magnification of the vertical or horizontal direction, not the area.

•The selectable value may change according to other settings.

PAN

V-POSUse to make vertical adjustments to the position of the sub-image. The sub-image moves down as the number increases.

H-POSUse to make horizontal adjustments to the position of the sub-image. The sub- image moves to the right as the number increases.

FRAME Selects the desired position of the sub-image. Select the desired position by pressing

POS the ª or º buttons on the control panel (or { or } buttons on the remote control) .

FRAME Selects the desired size of the sub-image. Select small, medium or large by pressing

SIZE the ª or º buttons on the control panel (or { or } buttons on the remote control).

28